GM Truck Club
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER

Top Kick HID head light conversion

Pics, Tips, Tricks, and wiring lessons learned this is the install wiring and tricks for gmc to follow
  1. now comes fitting all back into the mock up holes, more to come tonight when i return
  2. all 4 lights need to be looking like this.
  3. making it fit now in side the light well, and checking that the seal is good, and wires are insulated from the back heat of the bulb
  4. use gloves when handling the bulbs, the oil from your skin dose bad things to these bulbs
  5. here are all the pieces X 4 and your ready to go....
  6. now the assembly
  7. OHHH!!!! its a perfect fit  not to tight not to loose
  8. always trim a little at a time to much  wins you a trip to the wrecker or the parts store
  9. first fit to tight  need some more trimming
  10. so some more trimming
  11. need to make tis fit snuggly into the stock light well
  12. some cutting  required, the bic lighter should give you an idea of the scrap needed to be removed
  13. the tear down
  14. stock  head lamp
  15. mockup fitting
  16. need to fit two lamps  ballast and all wiring in this spot, good thing we got some room
Showing photos 1 to 16 of 16