GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER

Audio System/Alternator Power Wire

Photos of the sound system in my truck and the 2/0 power feed wire I installed between the alternator and the battery. There is also an additional ground wire installed from the battery ground to the frame at the back of the cab, and a bolt going through the frame and another wire continuing from there up to the floor where the amps are located, with a bolt going through the floor for attaching the grounds from the amps.
  1. 8 inch Kicker Solo Baric.  Enclosure designed and built by Magnolia Hi Fi.
  2. Sony XR-C720 head unit.
  3. 100 7150
  4. 2/0 power wire from alternator is attached to battery via a galvanized marine terminal on the top of the battery.
  5. 100 7144
  6. 100 7143
  7. 100 7142
  8. 2/0 wire made in USA.  Copper terminal is crimp fitted.  Other terminal, which attaches to the alternator, is crimped and then soldered.  Shrink fit...
  9. Bolt through floor attaching ground wire from battery to floor and to grounds for amps.  Floor is sanded, cleaned with DeOxit, then a copper washer...
  10. 100 7134
  11. 100 7131
  12. 100 7130
  13. 100 7129
  14. 100 7125
  15. 100 7123
  16. 10 inch Kicker Solo Baric sub.  Enclosure made of reinforced 7/8 inch plywood.  I built this per Kicker's specifications for volume of box, and it is...
  17. 100 7104
Showing photos 1 to 17 of 17