PDA

View Full Version : Misfire

KingDNH
02-13-2008, 12:12 PM
hello, I'm getting code p0135b that is causing my engine to missfire and then throws a missfire code. I've checked a ton of things, but don't know how to get rid of this!!!
I've got a Chevy Suburban 03 AWD 5.3L
Please help.
GaryL
02-13-2008, 01:21 PM
P0135b is the code for the O2 sensor, bank 1 sensor 1. Probably need to replace this O2 sensor. It is the one on the drivers side exhaust closest to the engine.
KingDNH
02-13-2008, 02:26 PM
I already changed the O2 sensors. Let me know if you think of something else, thank you!
collinsperformance
02-13-2008, 02:59 PM
not to be a pain, but new does not always mean good. i had many new parts that were junk. did you test the old one? you might have a wire or connector issue as well......mike
dwill3015
02-13-2008, 03:23 PM
the same thing happened to my wifes 2001 suburban and after much troubleshooting it turned out to be a bad coil pack