PDA

View Full Version : heater fan relay


soatway
10-05-2008, 02:35 PM
I have a 94 k2500 gmc suburban with the 454 and a/c. I am having a problem with my heater fan motor. The motor works fine but only on low or high. There are two medium settings where nothing happens anymore. As i go though the differnt positions i can hear a soft clicking coming from what appears to be four relays sitting on top of the heater ac unit under the dash. I have the glove box out. How do i isolate the relay? Are they all the same part? Can anyone help me? I have read the available posts and feel like I am close to a solution.

collinsperformance
10-05-2008, 03:38 PM
i bet it is the resistor pack or switch that is the issue. the resistors control what speed the motro goes into...........mike

dwill3015
10-05-2008, 04:25 PM
Check THIS THREAD (http://www.gmtruckclub.com/forum/showthread.php?t=15075)out and it should give you some good info.

unplugged
10-05-2008, 06:30 PM
Check THIS THREAD (http://www.gmtruckclub.com/forum/showthread.php?t=15075)out and it should give you some good info.

Bravo. Not the most complete body of data, but very, very good. Thanks!:rofl:

soatway
10-05-2008, 06:59 PM
The resistor pack sounds like what was calling the relays. I work at a gm store so will check it out . Thanks/