PDA

View Full Version : Have you lowered your Canyon/Colorado

hotrodbob
05-14-2006, 10:29 PM
I just put a DJM drop kit on my '05 Crew Cab LS. Looks great, but drivers side front tire bottoms in the fenderwell. Anyone else have any experiance with a 3/4 drop?
Chevy Accessories (http://www.gmpartsclub.com/chevy-accessories.html)
bmxguy44
10-09-2006, 10:19 PM
yes I did the same thing and had the same problem and also the left side was lower than the right by 3/4 of an inch.I put a 3" block on the right side and a 2" block on the left in the rear. Also sway bars from bell tech
hotrodbob
10-10-2006, 05:14 PM
Bell Tech has Sway bars. GREAT! Helwig does too, but I can't find anyone that has them or will even order them for me.

To stop the front from hitting I space the drivers side bump stop down 1/2 inch. Cut the read bump stops 1" and it's better. I will go to shorter front tires.
bmxguy44
10-10-2006, 07:26 PM
truckperformance.com has the sway bars. They have fronts and rears, about 2 hours to install both.
hotrodbob
10-11-2006, 12:44 PM
truckperformance.com has the sway bars. They have fronts and rears, about 2 hours to install both.

Cool, I'll check them out.
hotrodbob
10-11-2006, 12:59 PM
Checked them out and will order them. Price is not bad!
Steve
11-16-2006, 10:57 AM
How did it turn out?
hotrodbob
11-16-2006, 08:48 PM
Have not bought them yet. Job changes possible so I'm holding off until after the new year.