35's on 3inches

[tigersdl65]

I need some help, and by the way I'm new here. I have a 1996 chevy 1500 running 33inch BFG a/t's on stock suspension. I would like to know what yall think of putting 35 inch swamper TSL's on a 3inch rough country suspension lift. Is it a good idea or bad????

[Jimbo74]

i would suggest a body lift. i ran 35s on my 2001 silverado 4x4 with a 3 inch body lift and they didnt rub at all. them tires would be close with just a 3 inch suspension lift. i no they fit with a 4 inch , my buddy runnin a 4 inch rancho with 35s

[Pete95Sierra]

you may be able to squeeze em in, but you will have to cut significantly in the front

[tigersdl65]

Well i cant go with the body lift as i have a brush guard, nerf bars, and hitch reciever. also heard I cant flex much with 35's

[Jimbo74]

u can run the body lift with the stuff u got, u gonna have to have brackets made for the brush guard, and a lil longer of a bolt for the nerf bars, and the body lift comes with blocks for the hitch, i had all that u have except the brush guard on my old 01, and i was runnin 35s with a body lift. i had plunty of flex, but whatever u choose good luck and keep me posted with some pics

[95CTburb19]

Yeah that will be close with the 3 inch. Probably will need to trim. You don't have to worry all that much of flex, IFS don't flex! :rofl:

[tigersdl65]

Yeah that will be close with the 3 inch. Probably will need to trim. You don't have to worry all that much of flex, IFS don't flex! :rofl:
Then what word would i use instead of flex? thanks