View Full Version : Plastic
What is the best way to remove wax from plastic....fenders and bumpers... is there something i can buy to take it off...or rub it off with gas or WD40 anything
raiderman8112
05-13-2009, 10:34 PM
i use simple green and a very stiff toothbrush, it takes it right off
cascott325
05-13-2009, 11:03 PM
i just rubbed it off after a good rain. keep it wet for a while, then try rubbing it off, maybe try the tooth brush thing
nickgiacalone
05-13-2009, 11:14 PM
i use simple green and a very stiff toothbrush, it takes it right off
that is the same method i use. we had a thread not too long ago about this same issue. if that doesnt work you can try Mother's Back to Black found here http://www.mothers.com/02_products/06108_c.html
i have never tried the mother's stuff but some guys on here says it works well
raiderman8112
05-13-2009, 11:21 PM
ive tried the back to black but it doesnt seem to work well for me at all....
Dr_Zero
05-14-2009, 10:56 AM
Havent tried on plastic but it used to get in the louvers on the mustang and I would use a Q-tip dipped in rubbing alcohol to get the wax out of the grooves.
i use simple green and a very stiff toothbrush, it takes it right off
What kind of simple green. i bought some stuff in a squirt bottle i think it was all purpose is that what you used to take off the old wax
nickgiacalone
05-23-2009, 07:36 PM
What kind of simple green. i bought some stuff in a squirt bottle i think it was all purpose is that what you used to take off the old wax
Yes, this is what I use http://buy.simplegreen.com/product.php?productid=16133&cat=256&page=1 I buy it in the gallon jug tho. I use it for anything you can think of around the house. Its great for cleaning carpet and cloth seats as well. Plus, it leaves a great smell!
silveradotrailblazer
05-23-2009, 07:53 PM
Heres a trick I use before I wax. Apply a good amount of any armor-all type protectant on all the plastic and leave on while you wax your truck. After wax dries wipe off protectant and then remove wax. Any wax that got on plastic will wipe off with the protectant.
97chevz71
05-24-2009, 01:35 PM
All you need to do is get some kind off all purpose cleaner. If it is good stuff diluted 50/50. spray it on your plastic and scrub it then rinse off. Then put your dressing on your plastic. I use Adams All purpose cleaner and adams Vrt on my truck it is the best by far.
omegafiler
05-24-2009, 01:39 PM
Magic Eraser works great. There are other options, just keep in mind that most things that make it shiny are probably just covering it up and it will just return once that wears off.
|
vBulletin® v3.8.4, Copyright ©2000-2010, Jelsoft Enterprises Ltd.