PDA

View Full Version : 4x4 engagement


carlos
11-13-2006, 01:44 AM
does anybody know how the front diff on a 94 chevy suburban 6.5 turbo diesel engages ie. electric, vacumm, or mechanical. right now the 4x4 wont engage on my burb and the light wont come on even for low range

84fiero123
11-13-2006, 05:58 AM
electric, i beleive

GrimReaper
11-13-2006, 05:07 PM
Thermal electric actuator....its a Piece of junk and prone to failure. I think the dealer gets something like $150 for it. I believe its available now at parts stores like Auto zone, Advance, Napa. There are cable conversion available as well.

carlos
11-15-2006, 12:39 AM
were might this cable conversion be available?

AndyD
11-15-2006, 06:02 PM
Do the 3/4 ton burbs with the transfer case selector on the floor with the manual shifter lever on them have the same actuator as the push-button 4wd systems?

unplugged
12-08-2006, 06:47 PM
I have a 93 burb and a shop quoted me $300+ for the parts and conversion kit to the GM retrofit. I got the OE pn from the chevy dealer and called NAPA. They had the original electro/thermal actuator and with my AAA discount it was $79. Swapped it out in 20 minutes. I figure if the original lasted 200k miles, I could afford to change it every couple of years myself. 4wd working fine.

Aeropagus
12-09-2006, 06:27 AM
Carlos, any progress on this problem?

carlos
01-01-2007, 09:54 PM
ohya i made progress just went out and bought the posi-lok cable operated mechanism to engage the front diff. Canada www.4x4posi-lok.ca or USA www.4x4posi-lok.com i havent installed it yet but it should make a huge difference