Tourque parts

[OleBlue93]

hey whats up im brian and im looking for more tourque parts and was wondering, cause im building a budget build but for tourque for my 93 silverado heavy half ton 4x4. I already have a bored 46mm throttle body (42mm stock) 590cfm, edilbrock tbi intake tbi spacer 1.6 roller rockers cam kit (includes cam, lifters, timing chain, valve springs, valve locks, retainers, and all gaskets) custom programable chip and underdrive pullies and thats about it for now i plan to save up for 4.10 gears but dont have a grand to spend but my 1st question is what else would i be able to do pretty cheap on cost? 2nd question is about how much power do you think this setup prolly gives a stock tbi 350 thanks again to any1 who posts

[IThurstSObad]

have you done exhaust and cai? thatll give you a lil more snap.

[OleBlue93]

yes i have ceramic coated mid length headers going into 3 inch Y pipe into 3 more feet of 3 inch into another y pipe into 2 5 inch stacks and my air intake is a carbureated style chrome air cleaner with a K&N air filter i was thinking about getting head work (ported & polished and bigger valves):great:

[TheTransportGuy2]

TBI heads are terrible. They are the high swirl type and almost half of the intake port is blocked off in them. It's amazing that they run as well as they do. Don't spend 25 cents on them. Since you can do a custon tune, I'd say go with a regular set of stock Vortec heads and Vortec/TBI intake. That will make a world of difference since you have already done the exhaust.

[OleBlue93]

thanks i appreciate all your input on the subject