replacing cab corners

[krazyballer]

Im looking at a 1994 chevy silverado 1500 reg cab and was wondering how hard would it be to replace the cab corners. Or should i just leave them alone.

[84fiero123]

Didn’t we just answer this for someone?

Replacing them is not all that difficult. Get rust replacement panels. Cut all the old rust out to match the new cab corners, fit your new cab corners and rivet them in.

This gives you a nice tight fit for then welding them in. then used body mud and sand and file and primer and paint.

Job done.

[MD4x4 Fireman]

Didn’t we just answer this for someone?

Replacing them is not all that difficult. Get rust replacement panels. Cut all the old rust out to match the new cab corners, fit your new cab corners and rivet them in.

This gives you a nice tight fit for then welding them in. then used body mud and sand and file and primer and paint.

Job done.

you just answered it from me in the topic like 2 down titled body work:neutral:

[krazyballer]

o0o my bad, well thanks anyways.

[MD4x4 Fireman]

o0o my bad, well thanks anyways.

its all good. i used to ask questions that were just answered before