OK all you Seafoam fanatics, just put a pint of trans. treatment in my truck. Hope this fixes the 1st to 2nd shifting problems!
Installed a stock GM trans. cooler. Now have the radiator and a remote to both heat and cool my Tranny! Also put an extra capacity cast alumn. pan on. Was going to try the Derail pan/cooler but heard to many complaints about sealing problems! Any one else heard this?
Anyone out there installed a OEM heated seat kit in their truck? If so would appreciate any tips! Thanks in advance!
Still having shift problems, 33,000 miles. Does not want to shift out of 1st. gear sometimes! I disconnected my Edge Programer and still have the same problem so know that is not the problem. Had a gear-vendor 2spd. box installed but would not think that would be the problem but it is electrically hooked up...? I think I have a shift solenoid going out but not sure. last time I took it to the dealer it of course would not do it for them! and they see no codes. Put a deep trans pan on so fluid is
Any one out there done an exchange on instrument clusters? Have a 2009 serria 1500 SL (has idiot lights) Am looking at exchange ones on e-bay, so they have to be re-programed. One seller says he will program the unit for me, wonder if I should believe him or just take it to the dealer for the programing. Also there is a 140mph speedo (I know, the truck won't go that fast!) Does anyone think there would be any problems installing one of these? Thanks in advance for any advice!