GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
  • Chevy Colorado / GMC Canyon Truck Recall

    DETROIT (AP) General Motors is recalling more than 145,000 pickup trucks because the hoods can fly open unexpectedly and block the driver's vision.

    The recall affects Chevrolet Colorado and GMC Canyon midsize trucks from the 2010 through 2012 model years. Most of the trucks were sold in North America.

    The U.S. National Highway Traffic Safety Administration says some of the trucks may not have a secondary hood latch. If the main latch isn't fastened, the hoods can open while the trucks are in motion.

    GM said Thursday that it doesn't know of any crashes or injuries caused by the problem. The automaker traced the problem to a parts supplier after getting four reports of trucks with missing secondary latches.

    Owners will have the option of checking the hoods for the secondary latch or taking it to a dealer. If there's no secondary latch, GM will replace the hoods free of charge.

    The recall includes 118,800 trucks in the U.S., 15,264 in Canada, 7,492 in Mexico and just over 4,000 in other countries, GM said in a statement. Owners are expected to get recall notices in the mail starting next month.
    This article was originally published in forum thread: Chevy Colorado / GMC Canyon Truck Recall started by Steve View original post
  • New Posts

    BornAgainBiker55

    Mirrors with turn signals - 2001 Silverado

    I looked into this with my '07 NBS. The GMT-900s are pre-wired for the turn signal as long as you have the heated / power mirror option. Your GMT-800

    BornAgainBiker55 Today, 09:03 AM Go to last post
    BornAgainBiker55

    installing power windows and locks question

    I would imagine you could. I can think of multiple things that would need to be replaced to get power windows / locks:
    1.) The window regulators

    BornAgainBiker55 Today, 08:48 AM Go to last post
    BornAgainBiker55

    DIY Bedliner

    Personally, I bought a truck once with a plastic insert bed liner; that was the worst thing ever. I did a DIY liner using some sort of mix-it-up epoxy

    BornAgainBiker55 Today, 08:12 AM Go to last post
    PEDERSENJOSEPH

    North bay white gurl :: 1994 chevy s-10 ls work whip

    North bay white gurl :: 1994 chevy s-10 ls work whip (2014-04-17 07:46:37)

    PEDERSENJOSEPH Today, 07:46 AM Go to last post
    PEDERSENJOSEPH

    707 Bertha BZ :: 1990 Chevy CK1500 454 SS

    Bertha :: 1990 Chevy CK1500 454 SS (2014-04-17 07:25:51)

    PEDERSENJOSEPH Today, 07:25 AM Go to last post
    kbonanny

    Rear window removal & replacement 98 K1500

    I had a ratchet strap get between the box & cab of my truck (on the highway) and the end of the strap wrapped around the driveshaft, destroying my

    kbonanny Today, 06:53 AM Go to last post
    kbonanny

    gas problems

    In 1988 they came with bot TBI (Throttle Body Injection) or a Quadrajet. If you let me know which one you have I can give you sound advice on what to

    kbonanny Today, 06:50 AM Go to last post
    Pikey

    Rough Idle 2013 2500 Suburban

    Just curious, what brand and octane fuel are you running in it?

    Pikey Today, 06:47 AM Go to last post
    purtdamngood

    Big Ugly :: 1989 Chevrolet Suburban

    Nice 'Burb!

    purtdamngood Today, 06:26 AM Go to last post
    zuki82

    1985 GMC S-15 mystery challenge......who can figure THIS out?

    Exactly! You have an after market cam, so the timings going to be off the mark, so you might have to go to summit racing and get a timing degree wheel,

    zuki82 Today, 06:10 AM Go to last post