My latest Chevy Project
by, 06-28-2012 at 01:50 PM (1349 Views)
My latest GM project isnt a truck but still one I think GM lovers will appreciate.
I recently swapped a Toyota "S" Runner pick-up I was in the middle of building for a running but well worn 1 family owned 1970 Chevy Nova II SS.
This ones not particularly a rare car as it had no options and only the 327/4spd manual, original color was white, black top, gloss black SS striping, and black interior.
A neighbor of mine had the car, his 93yr old grandmother gave it to him as a graduation present last year since she hadnt been able to drive it for the last few years. He's going to college this fall and decided it wouldnt be a good car to have since something breaks on it every other week and he wont have his dad at college to help fix it or pay a mechanic.
The Nova will be my wife's for when she gets tired of driving her HHR.
As stated its a 1970 Chevy Nova II SS, it's originally a bare bones car with the only option the "SS" package which added ralley wheels, stripes, blacked out grille, gauges, bucket seats, center console, floor shifter, power steering, power brakes, and "SS" badging.
For some reason the car had the bucket seats and center console deleted and was delivered with a bench seat but the "SS" floor shifter and a short console with a tach, oil pressure, water temp, and amp gauge are there.
Other than that its manual windows and no A/C.
The exterior isnt terrible, no body damage or rust, a few trim items missing and it's got a bad Maico repaint.
Engine/transmission run ok, 327 with Muncie M22 4 speed, no mods, still wearing factory paint, they have 127,xxx miles on them, the clutch was replaced 5K miles ago and a tune-up was done by a local shop recently.
The suspension, front and rear, along with the brakes were rebuilt last summer so all they need is to be cleaned and painted.
The interior was the best part of the car, the PO's father owns a local interior buisness and recently redid the interior, seats, door panels, and console in leather, OEM headliner, and OEM carpet kit. They put buckets in while redoing the interior but as part of the deal they recovered the factory bench and I'm gona put it back in.
The wire harness is in great shape with none of the normal cracked and bare wire issues.
Our plans are to repaint it, right now it's white with a black vinal top, we'll replace the top and paint the car Charcoal metal flake grey with matt black SS stripes.
This winter we plan on pulling the engine/trans and doing a rebuild. We'll rebuild it stock, the 327 was never a particularly powerfull engine and our plans are to cruise the car so we dont need big HP.
Already ordered a "Vintage Air" Factory AirConditioning kit to install, a power window/power lock kit, and a Vintage tunes radio to replace the aftermarket radio swapped in.
Our goal is to do a Custom restoration, it wont be fully restored and correct but it'll look like it is with new electronics and comforts.