1. Welcome To GMTruckClub.com!

    The #1 Chevy Truck Forum Online
    Online since 2004, we are the #1 Chevy Truck & SUV forum and user community. If you have any questions about your Chevy or GMC Truck, SUV or Crossover, or just want to connect with other GM owners and enthusiasts around the world, you've found the best place on the internet to do that.

    Join Today ~ It's Free
    Registering is Free and Easy! Hope to see you on the forums soon!

Album: The hunt & restoration of my 1990 Silverado.

Much to my surprise, I bought this truck sight unseen off the auction site. It didn&#039;t cost a lot, but once you commit yourself to a restoration it gets complicated and expensive. At that point you have to see and think about where you are going, and is the chase worth the run. For me, It was.<br /> <br /> The truck was bought and stayed in the central Pennsylvania region. It was a dealers pick and was initially just a two-tone black and Gold pickup truck. It had many &#039;creature comforts&#039; RPO&#039;s and the first buyer wanted some options it didn&#039;t have, so the dealer install all but one of the options, which is a Limited slip differential and I&#039;m trying to get that done in the future. I would never have enter into this if not for friends who own auto repair shops and they took a good look at it from underneath and on topside. The verdict was it wasn&#039;t rusted beyond help, in fact it had very little rust for such a 22 year old vehicle as per the salt PA uses during an average winter. So it was first went to the mechanical shop and we invested 2K dollars to refurbish the most critical systems, then to the body shop, the cab and chassis stayed together, the bed was removed and two teams worked on the truck for a week, all was done and the body put back on and we decided to repaint only the black as it was the worst off, and one corner of the cab, right below and at the passengers side back corner was cut out and a new corner was welded in and repainted the correct gold and we flatbed towed it to a really good Macco whom painted the already pre- prepped black upper section with Onyx Black enamel The stock color. And Thank you to LMC corporation from whom I bought a small fortune in parts. That was last year and since then I have slowly gotten about to the replacement of the very typical parts that might and or will die soon.(the fuel pump died yesterday on me, thanks again to AAA for the towing. And it is now getting a new fuel tank and pump. <br /> <br /> Other than that, I have been collecting

The hunt & restoration of my 1990 Silverado.

Updated Jul 9, 2013
Jul 9, 2013  
Jul 9, 2013  
Jul 9, 2013  
Loading Photos......
Loading Photos......
JTWard
Much to my surprise, I bought this truck sight unseen off the auction site. It didn't cost a lot, but once you commit yourself to a restoration it gets complicated and expensive. At that point you have to see and think about where you are going, and is the chase worth the run. For me, It was.

The truck was bought and stayed in the central Pennsylvania region. It was a dealers pick and was initially just a two-tone black and Gold pickup truck. It had many 'creature comforts' RPO's and the first buyer wanted some options it didn't have, so the dealer install all but one of the options, which is a Limited slip differential and I'm trying to get that done in the future. I would never have enter into this if not for friends who own auto repair shops and they took a good look at it from underneath and on topside. The verdict was it wasn't rusted beyond help, in fact it had very little rust for such a 22 year old vehicle as per the salt PA uses during an average winter. So it was first went to the mechanical shop and we invested 2K dollars to refurbish the most critical systems, then to the body shop, the cab and chassis stayed together, the bed was removed and two teams worked on the truck for a week, all was done and the body put back on and we decided to repaint only the black as it was the worst off, and one corner of the cab, right below and at the passengers side back corner was cut out and a new corner was welded in and repainted the correct gold and we flatbed towed it to a really good Macco whom painted the already pre- prepped black upper section with Onyx Black enamel The stock color. And Thank you to LMC corporation from whom I bought a small fortune in parts. That was last year and since then I have slowly gotten about to the replacement of the very typical parts that might and or will die soon.(the fuel pump died yesterday on me, thanks again to AAA for the towing. And it is now getting a new fuel tank and pump.

Other than that, I have been collecting

Actions

Share This Page