GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER

trans removal tips

  1. Mean_Green_95
    Mean_Green_95
    Just got my 95 back. Had a new clutch, clutch kit, pan gasket, and rear main seal put in it. It looked like a sweet deal at first, but the guy's cousin put red fluid in my trans and I wouldn't have know if he hadn't had installed the metal plate between the shift tower and trans upside down. So I fixed that problem myself, but now the real seal is leaking. So now I'm going to pull the trans back out and fix the leak myself. Any tips from you guys?
    0 Thanks, 0 Likes, 0 Dislikes
  2. murdog94
    murdog94
    The rear seal can be in done in truck that is if its the tranny rear seal. Is it a 2wd or 4wd??? As for pulling it that isnt to bad and actually everything is fairly simple. Just make sure that you disconnect all the wiring and keep it out of the way.
    0 Thanks, 0 Likes, 0 Dislikes
Results 1 to 2 of 2