GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Tab Content
No Recent Activity

24 Visitor Messages

  1. View Conversation
    How do you like the Hypertech Max Energy Econ programmer? I've been looking for something simple that will improve mpg in my 07 5.3L NBS silverado.
  2. View Conversation
    no problem im going to be ordering through my buddys shop but there are websites on-line i heard spyder makes a good wheel spacer.
  3. View Conversation
    cause a positive off set push's the wheel in too the truck more and a negitive brings it out you might need 1.5" spacer too clear the oversize knuckles and ball joints.like right not im running a 20x9 rim with a 0 offset so im sticking out about .75 offset where my dad is running a 20x9 with a +10 or +18 off set which his rims and tires sit flush to the fender like a stock wheel that comes on it. but if u get wheel spacer make sure you tighten them all befor anything im going to be picking up a set of 1.5 now next month when my 6" lift gets installed.
  4. View Conversation
    i would not recommend useing a wheel spacer since ur aftermarket wheels are already a 5.5" and all you need is 5" of back spacing the most you might have to do is trim a lil more then you usally would all the wheel spacer is going too do is push it out even further plus the only reason there useing the wheel spacer on stock 17 is cause there is not enough back spacing to clear the over size ball joints. the other thing is, is the rims a positive offset or a negitive.
  5. View Conversation
    hey sorry have not checked back for a while, but turns out i thought i was having ball joint problems thats why i said that. it was only the used wheels and tires i bought doing all the vibrating. i have since bought new wheels and tires and am having great luck with everything
  6. View Conversation
    well i really did not have the right tools like impact gun and such..i used all hand tools so it kind of was a pain so it took a little longer. took about 5 1/2 hours but with power tools prob could have done it in 3-4 hours
  7. View Conversation
    that link i sent you with the buddy who has the 4 inch readylift kit .... he is running 17's???????
  8. View Conversation
    i have heard people complain about the 3 inch rough country lift causing problems with ball joints and riding rough. if you were going to spend 1000 on the readylift 4 inch kit ... i recommend you go with the 5 inch rough country lift which is about 1000. it would look great with 33's and you could go 35's later down the road if you wanted
  9. View Conversation
    My truck is only leveled out but your gas will go down a little bit.I am liifting my truck soon.I just bought a six inch procomp lift. I was looking at getting the lift you want but 35" tires wouldn't fit. That why I went with the 6" lift.
  10. View Conversation
    No problem!
Showing Visitor Messages 1 to 10 of 24
Page 1 of 3 123 LastLast
Page 1 of 3 123 LastLast
About TexAg95

Basic Information

About TexAg95
Location:
Colorado Springs, Colorado
Interests:
Golf, Boating, Hunting, Fishing
Occupation:
Software Development & Test Manager
Vehicles:
- 2007 GMC Sierra 1500
- 1997 Ford Expedition
- 2003 Mariah SX20

Signature


2007 GMC Sierra 1500 4x4 Crew Cab
- LineX bedliner
- Leer 700 Tonneau Cover
- 17" Ballistic Hostel Wheels
- K&N 63 Series Air Charger Cold Air Intake
- Magnaflow dual exhaust with black chrome exhaust tips

Statistics


Total Posts
Total Posts
21
Posts Per Day
0.01
Albums
Total Albums
1
Total Photos
8
Visitor Messages
Total Messages
24
Most Recent Message
03-17-2011 07:45 AM
General Information
Last Activity
10-16-2012 05:14 PM
Join Date
06-25-2009
Referrals
0

9 Friends

  1. 08SierraZ71 08SierraZ71 is offline

    Jr. Apprentice

    08SierraZ71
  2. chschevy58 chschevy58 is offline

    Sr. Engineer

    chschevy58
  3. c_m_chance c_m_chance is offline

    Jr. Mechanic

    c_m_chance
  4. rotaryenginepete rotaryenginepete is offline

    Jr. Engineer

    rotaryenginepete
  5. Shorty 71 Shorty 71 is offline

    Legend

    Shorty 71
  6. Silverado Junkie Silverado Junkie is offline

    Master Mechanic

    Silverado Junkie
  7. SoCal Chevy SoCal Chevy is offline

    Jr. Engineer

    SoCal Chevy
  8. Stealth Stealth is offline

    Legend

    Stealth
  9. thatoneguy99 thatoneguy99 is offline

    Jr. Apprentice

    thatoneguy99
Showing Friends 1 to 9 of 9
No results to display...
No results to display...
No results to display...
No results to show...