GM Truck Club
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Tab Content
No Recent Activity

5 Visitor Messages

  1. Hey thanks. The black bowtie was very easy. Undo the fasteners behind bowtie, pop it out. Sand it so that spray paint will adhere better. I used black satin Krylon which is made to adhere to plastic objects. Debadging on the other hand was a pain. Tried several techniques, got it off with heat gun and fishing line. A local detailer said they will usually do it for about fifty dollars with out damaging the paint. Just a tip for you.
  2. View Conversation
    Hey lovin the black bowtie and debadging, was it hard to do either of those? Did you do them yourself or have it done?
  3. View Conversation
    well i had them put on profesionally because i was busy with swim team and school at thime but ive looked at them a few times and it looks really easy. its just 6 bolts on each side and theres no drilling. it all bolts onto pre existing factory holes for the factory steps. the oly trick part i could imagine would be aligning it straight when you instal them, which would probly be really easy if u had 1 person helping you out
  4. View Conversation
    thanx i got the nfabs pretty cheap and i love the look to. and im not a big fan of lightbars on daily drivers. but in the long future i might make this my project truck haha
  5. View Conversation
    Hey thanks for compliments, ive got all my info from this place and alot of research. I only have a 2.25 inch leveling kit from readylift. After alot of research i found this to be the best product. It gives you 2.25 inches of lift in the front while all others ive looked into give you only 2 inches of lift. My wheels are 18x9 with a positive 10 offset or 5.4 inches of backspacing (those numbers are very important). My tires are 33x12.50x18. Thats the only suspension modification on the truck. I have a wife and two kids to and was also considering a 4 to 6 inch lift. Let me tell you how glad i am i didnt do the lift. The cost of a good lift is going to run you $1800 plus another $900 for install, then you have to get new wheels and tires so its really pricey. A readylift leveling kit is around $200 and install can be done by you or a mechanuc for about $200. Feel free to contact me if you have any other questions.
Showing Visitor Messages 1 to 5 of 5
About wheelman

Basic Information

About wheelman
Husband and Dad of three great kids. Have always loved anything motorized!
Scale RC trucks, xbox live, and basically anything dealing with cars trucks bikes etc....
GM tool and die maker, currently stamping out silverado door rings and bed sides!
07 Silverado
07 Tahoe
03 Aprilia sr 50


Total Posts
Total Posts
Posts Per Day
Total Albums
Total Photos
Visitor Messages
Total Messages
Most Recent Message
11-16-2009 11:52 PM
General Information
Last Activity
03-18-2010 08:24 PM
Join Date

1 Friend

  1. Shorty 71 Shorty 71 is offline


    Shorty 71
Showing Friends 1 to 1 of 1
No results to display...
No results to display...
No results to display...
No results to show...