1. Welcome To GMTruckClub.com!

    The #1 Chevy Truck Forum Online
    Online since 2004, we are the #1 Chevy Truck & SUV forum and user community. If you have any questions about your Chevy or GMC Truck, SUV or Crossover, or just want to connect with other GM owners and enthusiasts around the world, you've found the best place on the internet to do that.

    Join Today ~ It's Free
    Registering is Free and Easy! Hope to see you on the forums soon!
Last Activity:
Apr 19, 2010
Mar 20, 2010
Likes Received:
Trophy Points:

Share This Page


New Member

99silv53 was last seen:
Apr 19, 2010
    1. 99silv53
      If its not too much trouble can u take a pic and send it to me? lol i understand to an extent but dont wanna un hook the wrong thing with a full tank of gas and it come poorin out lol
    2. ippielb
      On you drivers side, in that little inch gap between the cab, and the box. You can see the top of your gas tank. Stick your head between the frame and the body. You will see a little black box, with a thick hose going to it. IT will be on a bracket bolted down. The valve solenoid whatever you want to call it is made up of black plastic. You can try and clean it out, by taking an air compressor, WHEN ITS OFF, and blowing it out, and also removing both ends from the charcoal canister, where the tube goes to, its a grey box the size of an xbox. Remove both ends, and then take your air compressor and blow the tube out too. Because there gets ALOT of dust and dirt and just junk in that. I relocated my solenoid to my engine compartment. You can go to a part store and get the same diameter hose and run it all the way up to your engine compartment. I highly advise that. If this is your problem, you must be getting terrible gas mileage. I know i did. I hope this helps!
  • Loading...
  • Loading...
  • Loading...