GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Chevy Newby
Last Activity:
Aug 29, 2013
Joined:
Feb 24, 2009
Messages:
53
Likes Received:
0
Trophy Points:
0
Location:
Cleveland, OH
Occupation:
AT&T lineman

Share This Page

Chevy Newby

New Member, from Cleveland, OH

Chevy Newby was last seen:
Aug 29, 2013
    1. Chevy Newby
      Chevy Newby
      yeah man the push bar looks really sweet! it cost $2000 or $2500 not sure but it looks like no other bar you will ever see. His website is ultimatetruckgear.com The wheels im thinking of 20" or 22" not sure on what size tires. The Gear Alloy wheels have a big negative offset so they said it will stick out some so you have to have a truck with atleast a 6" lift. What else you plan on doin to your truck?
    2. Burden33
      Burden33
      truck sounds like she is going too look **** what size rims and tires are you planning on going with im going to have look at the punch bar i never seen it or knew he had a site . the wife gave me a go ahead and finish up my truck so im going to be doing a lil more stuff to the truck now in the next couple of months hopefully. lol she got to help support the toys some how lol
    3. Burden33
      Burden33
      i did the same for the fact of my warranty on the truck. i wanted one to but i ended up getting a raptor for the wife since she had to sell her car for it. so what all in store for the truck now since you got the go ahead
    4. Burden33
      Burden33
      hey bud, Thing been good how have things been with you? I love my fabtech lift and recommened it to anyone that ask its a 6" lift that measures out to a 8" my truck rides like its stock and my cv angles are better now then a stock truck im looking at running 33 or 35 by next year with a 4.88:1 rear end. you plan on doing the install your self or get a shop to do it?
    5. Burden33
      Burden33
      hey man ya its been awhile for the stero i have done nothing yet i ended up going with a 6" fabtech lift and a hypertech programmer. how did the bed liner turn out?
    6. Pete4757
      Pete4757
      Nice truck!

      Go Buckeyes! I am from Columbus!
    7. TRPLXL2
      TRPLXL2
      Thanks for checking in! I know how the back burner thing goes, one toy takes over for the other one. I am glad to hear that your bike is still coming along good, I will have to check out that website when I get a chance. I have been working a ton of overtime and haven't been on as much either, other than that I have been doing well so far! See ya round hopefully!
    8. TRPLXL2
      TRPLXL2
      Merry christmas!

      How's your bike coming along, i wondered if you ever finished it any more?
    9. SlickMachine
      SlickMachine
      Whats new man? Thx for stopping by. I havent been on the forums much, been busy. just completed my move from Houston to Ohio. About to lose my job, so on and so forth. When are you gonna lift that silverado?
    10. Burden33
      Burden33
      Hey man just woundering what kind of subs would you reconmend and should i run to 10's or two 12's
    11. Henchman
      Henchman
      Oh yeah...I've also added the back wheel house liner. man it makes a world of difference on the looks. And it's easy to install.
    12. Henchman
      Henchman
      Hey man what's up! I've been busy lately with work. I don't have any lift on my truck. It's raissed on the back end, but that came factory. Since I was last on, I've added afew more up grades and I'm almost complete with the exterior. I've installed the chrome caps for the side view mirrors, chrome door handles, and chrome bowties, front and back. I installed everything myself so it saved quit a bit of cash doing that. All I have left is spraying the bedliner and tinting the front windows a little bit darker. I think that's all I want to do to the outside. I don't want to go too overboard. Next is the engine. I plan to purchase the GM cold air inake system for it. I don't know what else to do to it other than that. I guess I can put a chip in it, but I think that voids the warranty. But the 36K mile mark is coming up soon and I might just do it anyways. I'll get some pictures up of what I have done in the next couple of days. have you done anything to your ride lately?
    13. Burden33
      Burden33
      Thanks for hte website im goign to run 2 rockford fosgates shallow there 800 watts peak and 100-400 rms what size amp should i run
    14. Burden33
      Burden33
      im looking at ordering the jl audio stelth box 1000 watt is this a good way to go or should i build my own any ideas will help thanks
    15. tlperry68
      tlperry68
      Yeah I'm not big on some of the barganing contracts here. Some things get passed with out us knowing about them. Funny how that works.
      I'm doing what I can to stay away from OT as I like my weekends free this time of the year.
    16. tlperry68
      tlperry68
      I hear that. Just don't pipm your self out for anything less than 50 bucks.
      I was just telling the wife today that I want to watch Duce Biggalo again.
      I am taking breaks between upgrades.
    17. 04blackz71
      04blackz71
      not much man just hanging in there
    18. TRPLXL2
      TRPLXL2
      Yeah I figured you would get a 300 series tire for the back, that will be perfect on there. I can't wait to see some of the finished pieces done in the nickel and copper, sometimes nickel looks better than chrome on certain things. Hopefully we'll get to see more pics.
    19. tlperry68
      tlperry68
      Hey man. Things have been good around here. I'd like to hit the lottery also. How's the chopper comming? I like the rims on it.
    20. tlperry68
      tlperry68
      Sweet! Sounds like a good project. Show us some pictures.
  • Loading...
  • Loading...
  • About

    Location:
    Cleveland, OH
    Occupation:
    AT&T lineman
    Vehicles:
    '01 Ford F-150
    '95 mustang gt
    '99 mustang gt
    '08 SILVERADO
    Former Ford truck owner

    horse back riding, dirt bike riding, eating and drinking

    Signature

    08 Silverado
    crew cab
    5.3 L
    LT1 Z71
    Black on Black Leather
    Much Much more to come...​
    soon as I get more $$$:money:​
  • Loading...