GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
KidHauler
Last Activity:
Jun 22, 2014
Joined:
Jan 16, 2009
Messages:
854
Likes Received:
4
Trophy Points:
0
Location:
MI
Occupation:
FF/EMT

Share This Page

KidHauler

New Member, from MI

KidHauler was last seen:
Jun 22, 2014
    1. Neel M3
      Neel M3
      Sorry about the delayed response. It was a transportation vehicle for an indian reservation in NM. Right now im trying to figure out how to sea foam the sucker.. :)


      As far as plane jane goes, i am more than happy with that.. Ive changed out so many electronic parts on cars/trucks over time i could care less... :)
    2. TritonBoulder47
      TritonBoulder47
      I've never seen them in person, but they don't look like they woould be very bright... But in theory you could hook them up to an LED flasher and make them dance...
    3. Neel M3
      Neel M3
      Hello, you seem to have the same burban i have, i was wondering if you happened to have a video clip of the sound yours makes with the exhaust and intake. I am thinking about doing the same so i was just curious. Thank you.
    4. s5belford
      s5belford
      Can I get that job info?
      steven_belford@hotmail.com
    5. s5belford
      s5belford
      Also, is there any chance you know of anyone looking to get rid of a 6x12 - 6x12 enclosed cargo trailer?
    6. s5belford
      s5belford
      Job possibility????
    7. In2Trux
      In2Trux
      KidHauler
      It's nice to know there is somebody out that is willing to give my 57 Panel a good home. I've gotten a few of these offers, here in North Bay, Ont and on the internet.
      Thank my friend, but I'll take good care of her.
    8. unplugged
      unplugged
      Just the part at the base of the column. The "key" portion is just that, a lock cylinder that actuates the switch and works the steering column interlock.
    9. s5belford
      s5belford
      Thanks for the help! I'll go anywhere, I don't really care about location, just somewhere with a payroll and health benefits :)

      Thanks again
      -Steve
    10. TRPLXL2
      TRPLXL2
      Here is the link for the valance: http://www.autostyles.com/piaaairdams.htm

      It uses a set of 510 series lights, or in normal terms a standard 6" off road light. The catch is they have to be slim lights, regular round off road lights will not work because they won't clear the frame. You could get the bumper and a set of real nice lights for about $300, but you would have to have that painted unless you like the flat black it comes in.
    11. TRPLXL2
      TRPLXL2
      I've had KC's as well, but ,y only problem with them is there wiring harnesses. They are under rated for what they pull, I had three sets of there lights and all three harnesses caught fire and the switches actually melted. That is why I won't buy them any more, I even talked to them at Summit Racing when they were a supporting vendor. The guy just told me and my dad that was normal when running a 130 watt light, that wasn't too cool by us and we vowed never to buy from them again. If you do buy some KC's make sure you upgrade the switches at least, they only give you a 5 amp switch . We had to go to a 40 amp switch from painless wiring to handle the lights, just a little head's up.
    12. TRPLXL2
      TRPLXL2
      Well my 1st choice that is actually vehicle specific for the 99-07 classic Silverado, would be the PIAA Quattro lamps. They have an 85 watt high beam bulb, a 55 watt yellow fog bulb and a built in turn signal plus a blue series vanity bulb. I actually just bought a set for my truck today for $300, other than that the OEM would be an option but they would cost just as much. If I remember right I think Pilot has lights that will fit in that spot, and they are under $100 for the set. Sorry I couldn't be of more help on that, I tend to spend a ton of money on lights LOL!

      Another thing that makes those hard to find is the size being rectangular, it would be so easy if it was a round hole for the lights. Another crappy idea from Chevy, but PIAA does make the lower valance for that truck that accepts a set of 6" lights instead of the square one's. That was what I had on my old truck, except mine was meant for 4" fog lights.
  • Loading...
  • Loading...
  • About

    Location:
    MI
    Occupation:
    FF/EMT
    Vehicles:
    1999 K2500 Chevy Suburban
    1989 C1500 GMC Sierra
    1985 G30 Chevy Van
    1967 Mustang
    2002 C2500 Burb
    Lots of kids

    All things tinker-able

    Signature


    1999 Chevy K2500 Suburban 350
    K&N, reworked cai, Thrush cat-backs
    Vinyl, cranks, floor shift, and rear air!
  • Loading...