that sounds awesome! let me know when you post that thread i might have to copy you
So I found the 5mm red and blue leds on Superbright leds dot com and if I put a resistor on each led, how do I know which resisters I need? and now they do have the 5mm in 360 degrees :-)
This is my set up. Everything is soldered, it's out of my 2004 silverado, as you can see from the display, the lights are dimmed down.
Nice i like the look.
I know this is an old post but $130 for parts? Ouch LEDs and resistors should not cost you more then $10 for 100pieces of each.
Also here are some nice LED for wide angles, I used these in my tow mirrors(amber in color though(
With mine i got 6 LED bulbs and 2 very small plastic tubes and cut it to fit in tightly inside the ac controls one twards the top and one twards the bottom. I mounted 3 on each and ran the power from my radio. 2 years later its still holding up
superbrightleds.com is what i used
what size resistors did you guys use?