Type: Posts; User: pantydropper
Search: Search took 0.14 seconds.
i want my front bumper about 1.5" - 2"s off the ground 6/8 - 7/10 just depends on what it takes.
i was wondering if a flip kit and drop hangars would work in the rear end of my pick up? also what would i have to do to make it level out in the front? i have a 2001 gmc sierra.
that doesnt make sense unless he put a 2" lift hangar on it with the flip kit.
theythey should have done 2 inch drop spindles 1 inch drop coils in the front an done 2 inch drop shackles with the 2-3 inch drop hangars.
if you do endup doing bags there will be no need for shocks because your bags become your shocks.
yes those are my old wheels i got rid of them because they were to big for the truck an what i want to do with it. they were 26'S
thanks man i put alot of time and money into it. i hope to have it sitting at either a 5/7 or a 6/8 drop on either 22's or 24's but that wont be until summer time
thats mine i have a 4/4 as of
right now done with drop spindles
an the torsion keys backed out in
the front an shakles an removed
the factory block in the rear. i have
a few other...
all you have to do to fix the high beam flashing is get a high six kit "bright box" made buy a local auto elcetronic store usually around $100-$175 to be made. that just allows your highs,lows and...
you will clear just fine with a 4/6 an it will look good. i would get a set of 26 inch rims for that truck with a 285/25/R26 and it would still clear
02-13-2012, 09:53 PM
you could either put your blocks on top of your leaf springs after you remove them, to save some money. or go and get 2wd U-bolts.
01-27-2012, 07:39 PM
well my truck is going to be a summer truck an i want it to be a 2wd so i can drop it lower with out baggs because i want to do a static drop on it an i couldnt sell it for the amount i would want to...
01-25-2012, 03:32 PM
i have a 2001 gmc sierra that i want to take out the 4wd an do a 2wd in it.
01-25-2012, 03:24 PM
I have a 2001 sierra 1500 I already have spindles with my keys backed out in the front (I have drop keys on the way. also I have a axle flip kit for the rear. not installed.) with drop shackles on...
there is usually the auto on the top of the four buttons then 2wd then 4hi an then 4lo. i havent ever seen a 2wd/4wd/awd actuator or heard of a transfer case like that either so its probably just 4hi
Results 1 to 15 of 15