Search:

Thanks! the one thing I never thought of was checking the dealer. There discontinued but still available they were 95.00 a piece but I gotta have em.

I have a 88 GMC Sierra Classic ( R3500) (454) with the factory oil cooler and well its leaking. I have looked everywhere for these lines and can't find them anywhere. I went to have them fixed but...

Up for sale is my 1988 GMC Sierra Classic 3500 Dually .2wd It is the 3+3 dual bench seat interior as well as the Sequoia Camper special. The truck has 93,000 original miles on it and the 454 runs...

I just bought a 1988 GMC sierra Classic 3500 dually 3+3 sequoia Camper Special. Its got 91,000 original on it. The truck has 91,000 miles on it and while the truck is running the oil pressure gauge...

I came across a 1988 3500 dually crew cab 3+3 sequoia edition today (with a little tepee on it) and considering buying it. Its got the 454, good tires, 91,000 original miles. the main thing is it...

I have a stock 89 suburban 1500 with the 350 v8, well I roasted the trans again after 100k, I am un sure of the trans in it now, my truck has a factory trailering package, I have a 700R4 trans in my...

When I had mine done it was about 1900 from the dealer including the torque converter

My suburban is an 89 1500 with the TBI 350 With 2500 rear springs in it and it will pull anything, Just use the trailer brakes. I personally have pulled 8500 pounds with mine before the 2500 springs...

I have monroe sensatracs on the front and monroe load adjusting coil overs on the back, a bit stiffer ride in the rear there a little more expensive.

My 89 1500 suburban has 315k on the body I had no problems with it until about 2001 when the tranny went after 250k of heavy trailer towing and in February 2010 I had the ol 350 re-built after the...

my suburban is a 89 1500 with the factory trailering package I tow a 18ft car trailer with big old iorn demolition derby cars on it that weigh an easy 4,000 pounds not including the trailer and all...

I would try to find a motor in the junkyard and have it re-built. a little more expensive or you could find a salvage motor out of another one I think it would be easier than trying to piece...

I am looking to upgrade to a newer truck I came across a 2 wd 2001 GMC sierra 2500HD. The bed is in bad shape no rust or accdents just scratches and scrapes etc.. and theres a few minor dents around...

I just had the 350 re-built after 300k last week in my 89 suburban , but I started noticing that after the motor got done the truck stays in 1st gear for a while and under acceleration as it shifts...

My suburban has the 350 and I tow a cars to the track by my house about 60 miles each way I just had it re-built at 319,000 miles last week, It was getting a-little Smokey and it threw a rod. My Dad...

My suburbans motor has a knock,(350 TBI) it misses at 15-35 mph but after that its ok.. I just had the heads re-done. My Grandpa said because the lower half has high miles about 170k The top half is...

I know a guy That has an 84 similar to the one mentioned. the only difference is His has a 350 in it. But In the summer it is VERY hot and sticky. but they will go through anything. They are tough...

I just has The valves done when I had the head gaskets changed. and he should have replaced them But I think I will take it back and make them fix it. since he charged me almost 2,000.00 for new...

I have an 89 suburban (throttle-body/fuel injection) 350 small block. I had the valves and head gaskets replaced about a month ago. A few days ago I noticed a "tick" coming from the motor. I went...

I was able to rent anything from them, I just told them I had a 2500 suburban :lol: But I have a 1500 suburban but I have load-controlling coil over shocks and a Heavy duty overload leaf. its easier...

When my head gaskets went my temp gauge would bounce and do the same thing but if the motor is new that shouldn't be a problem.

With the old 300k rear end the pinion nut rattled off sending the pinion gear into the gears and I iwas doing about 60 at that time. Cause a golf ball size hole in the gear housing.

that dosent seem too hard.. Thanks.

I am not sure. The stock rear end blew up after the pinion nut came loose and the pinion gear shot into the housing making a golf-ball size hole in it. The "new" one is out of a 90 1500 2wd burb and...

I just Bought an 89 2wd suburban that looks pretty much showroom worthy and only 3500.00. The truck was bought in Baton Rouge LA and was taken to texas. The owner moved up here with it a few years...