GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER

Search:

Type: Posts; User: Scott_Anderson

Page 1 of 7 1 2 3 4

Search: Search took 0.04 seconds.

  1. I will clarify and say that my 2000 was an OBS...

    I will clarify and say that my 2000 was an OBS carryover. By the time I got the truck, it's possible that a P.O. didn't understand the "carry over" issue and put the wrong size wiper on somewhere...
  2. By chance have you tried a very small touch of...

    By chance have you tried a very small touch of ether? (to rule out electrical ignition issues)

    I know it's not a mechanics best choice, but it can help diagnose the issues.
  3. I think it is going to come down to who can...

    I think it is going to come down to who can provide you the best service in the area that you will be in most.
    Where I live in Iowa, GSM carrier towers are few(att, t-mobile), their provided signal...
  4. As supply increases, so will demand. Local power...

    As supply increases, so will demand.
    Local power utility here where I am, is going to break ground soon for a new NG power generation station to replace an existing converted coal station.
    A local...
  5. What is coming up for the fault code.

    What is coming up for the fault code.
  6. So is this a new recall, or a repeat. 2014 Silverado trans line leaks.

    http://www.latimes.com/business/autos/la-fi-hy-chevrolet-silverado-cruze-recall-20140331,0,2743266.story#axzz2xbFD9C9h
  7. When I've been looking for parts I've looked in a...

    When I've been looking for parts I've looked in a couple of places.

    http://www.gmpartsdirect.com/

    but I've had better luck here.
    http://www.gmpartseast.com/

    Either one can be more accurate...
  8. Replies
    10
    Views
    472

    Looking at the rust in the picture I'd say that...

    Looking at the rust in the picture I'd say that it was already cracked for quite a while........
  9. Replies
    3
    Views
    239

    Re the Key, I'd suggest you take your vin to a...

    Re the Key, I'd suggest you take your vin to a dealer and ask if they can lookup the key-code for the locksmith. If the dealer can't find the info, you may be able to pull a lock for the locksmith to...
  10. Replies
    12
    Views
    343

    I've sold the truck so it doesn't really matter...

    I've sold the truck so it doesn't really matter to me anymore as I won't have to change them again.

    If you are interested here's a link show exactly what I had. Start a reply #9 and read onward....
  11. Replies
    12
    Views
    343

    Nope. It was a 2000 OBS K2500. Some where I have...

    Nope. It was a 2000 OBS K2500. Some where I have the RPO codes still written down, but it did have the heavy duty snow plow prep setup, and the heavier rating brake system.
  12. Replies
    12
    Views
    343

    Not sure if your hub assy would be different than...

    Not sure if your hub assy would be different than the ones I had, but I had a learning curve with the rotors......they were held on by the wheel studs from the back side of the rotor. I didn't know...
  13. Replies
    12
    Views
    343

    Well, I can say that I installed aftermarket hub...

    Well, I can say that I installed aftermarket hub assy's on my 2000 OBS K2500 4X4. One of them only lasted about a year. It was covered by parts warranty, but still my time/effort to change it out,...
  14. Did you get the brake calipers that were with the...

    Did you get the brake calipers that were with the replacement rear end assy?
  15. It should also be the same as the old K-series...

    It should also be the same as the old K-series blazers, if you can find one of them.....
  16. Why not just get a blade that is an inch or so...

    Why not just get a blade that is an inch or so shorter? That's what worked for my on my 2000 K2500.
  17. Replies
    5
    Views
    270

    Were they working before you changed them? or did...

    Were they working before you changed them? or did the old ones quit?
    I'm thinking a fuse, but I can't recall if that vintage had a fuse block under the hood or not.(I used to drive an 87)
  18. Replies
    3
    Views
    231

    I have not seen a technical schematic on this...

    I have not seen a technical schematic on this specific fuel pump circuit so my comments here are basic electrical theory(as a professional electrician). I think the relay powers the pump all the...
  19. Personally I'm surprised that they (the cars)...

    Personally I'm surprised that they (the cars) would have had gas in them(especially inside a building). One sure way to ruin a car, leave it with fuel in it.
  20. Replies
    3
    Views
    231

    Obviously melted plastic is caused by heat, to...

    Obviously melted plastic is caused by heat, to that end, heat is caused by: 1- load, 2- loose/dirty connection and/or pitted relay contact.
    In your case the whole situation could have started in the...
  21. Replies
    10
    Views
    385

    I would guess that you have a leak in the heater...

    I would guess that you have a leak in the heater core.
  22. Replies
    54
    Views
    3,025

    IIRC I had purchased an AirTex brand. I replaced...

    IIRC I had purchased an AirTex brand. I replaced the 1st pump assy around Nov'08, 2nd one came Oct'09(in warranty).
    The truck was still running with the 2nd replacement when I traded it off in...
  23. Replies
    5
    Views
    233

    Did the 4.3's use the same radiator as the 5.7?...

    Did the 4.3's use the same radiator as the 5.7?
    Sounds like you might need a larger(more cores).
  24. Replies
    20
    Views
    1,085

    I tend to agree ed, when I was trying to diagnose...

    I tend to agree ed, when I was trying to diagnose my C0225 error code on my 2000 OBS 3/4 ton, I definitely got a different code with the rear sensor disconnected.
    I had no short or open on the left...
  25. Locate the throttle cable connection, the TPS...

    Locate the throttle cable connection, the TPS will be on the opposite end of the shaft that the cable connects too.
Results 1 to 25 of 172
Page 1 of 7 1 2 3 4