Type: Posts; User: Kan1ck
Search: Search took 0.00 seconds.
Well, the dome lights do not come on when the passenger door is opened.
I will not be able to explore further until later in the week.
I will be checking the above suggestions and if nothing is...
2007 Silverado. Dome lights don't come on when door is opened. Dome light dash push button switch (to the right of headlight switch) is in the extended position. Dome lights will turn on manually...
To provide update to my earlier thread (closed).
I mulled the idea of adding filler weld to the inside surfaces of that 1/2" square drive socket (that I had welded to the long rod).
I then hit upon...
Thanks to rileyjr and jimmeh for the helpful information.
An old 1/2" drive X 3/8" 12 point socket welded onto the rod I've been working with confirms that I'm now heading in the right direction....
Thanks for measuring the square drive end. I can come up with a 1/2" female square drive end easy enough as I have a number of small 1/2" drive sockets that are worn out, useless for nuts & bolts...
I hope the image is clear enough to describe what I need to accomplish.
I now think the tool receiver on the hoist must be a MALE square drive........based on what rileyjr stated in his post, plus...
Thanks riley. OK, from your explanation I think you are telling me you used a 12mm open end wrench to turn the long rod that engages to the tool port on the hoist itself.
My problem has been that I...
You might want to look at the difference in your new truck spare tire hoisting set-up.
On mine, there is a long, hollow tube that spans from the hoist diagonally to the rear bumper. Probably 20 or...
I recently bought a 2007 Silverado, regular cab.
The spare tire tools (and jack) were missing.
I plan to use a hydraulic bottle jack for lifting but I need to know the dimensions of the "square...
Results 1 to 9 of 11