GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER

Search:

Type: Posts; User: Dana W

Page 1 of 16 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    10
    Views
    645

    No, they don't, but both kill front bearings. ...

    No, they don't, but both kill front bearings. Anyway, for spacers thicker than 1/4" to 3/8" you need longer studs.
  2. Replies
    4
    Views
    362

    In a Suburban, that's called a firewall. There...

    In a Suburban, that's called a firewall. There are no struts, so no towers. Separate ladder frame type vehicles will not benefit from tying the fender wells together like a pre 2005 Mustang GT or...
  3. Replies
    8
    Views
    525

    Yeah, it's always more fun when its that easy. ...

    Yeah, it's always more fun when its that easy.


    The dang thing was in a rental Ford mini-van, in the tall bin inside the rear hatch. Found it after 80 miles of mountain freeway and tightened...
  4. Replies
    8
    Views
    525

    Have you checked that your jack is strapped down...

    Have you checked that your jack is strapped down tight? Mine drove me crazy for a week.
  5. Replies
    5
    Views
    364

    Believe me, if the rubber is original it is...

    Believe me, if the rubber is original it is anything but good. 19 years? Ohhhhhh Kaaaayyyyy. :wink: It should feel thick and heavy and very resilient if it is good. If your 95 is anything like my...
  6. Replies
    4
    Views
    297

    Oh yeah, gotta get me one 'o dem thangs.

    Oh yeah, gotta get me one 'o dem thangs.
  7. Replies
    14
    Views
    908

    Glad yours is fixed, or at least not broken in...

    Glad yours is fixed, or at least not broken in the first place. :lol: . I have to leave my override button pushed in 'cause I am too lazy to replace my drivers door plunger switch which has gone...
  8. Replies
    5
    Views
    364

    Has the door lock catch on the door been adjusted...

    Has the door lock catch on the door been adjusted over time to compensate for the door pin wear? Maybe it needs to be looked at. Can you jiggle or rattle the door by hand when it's closed? Maybe...
  9. Replies
    2
    Views
    245

    You have worse problems than that. If there are...

    You have worse problems than that. If there are no brake parts in one of the rear drums, then there are none in the other one either. I can also surmise that the entire rear brake system has been...
  10. Replies
    2
    Views
    513

    Have you ever replaced the ball joints? We had a...

    Have you ever replaced the ball joints? We had a bolt on after market upper ball joint exibit those same symptoms because the mounting bolts cam loose and fell out. Subsequently, the steering...
  11. Blew a hole in what? Head? Side of block? What...

    Blew a hole in what? Head? Side of block? What blew the hole? Freeze plug? Connecting rod come through? What? Did you replace just the block, or did you get a newly rebuilt engine? Short...
  12. Replies
    3
    Views
    324

    The end links of what? Tie rod or sway bar? I...

    The end links of what? Tie rod or sway bar? I know the sway bar has end links, and the tie rod has "ends", but we have to be sure what we're reffering to.

    2x2 or 4x4? Makes a BIG difference.
    ...
  13. Thread: Belt Dressing?

    by Dana W
    Replies
    17
    Views
    1,483

    Gotta think it was the alternator in the first...

    Gotta think it was the alternator in the first place. Belt dressing is bad for the belt, but it only increases friction, doesn't eat alternators.
  14. Thread: P0059 code help

    by Dana W
    Replies
    1
    Views
    518

    The P0059 code means your O2 sensor, bank 1...

    The P0059 code means your O2 sensor, bank 1 sensor 1 heater circuit resistance is out of range. That dashboard stuff sounds unrelated.
  15. Hello, I'm Daisy, I'm hot, young and I like to...

    Hello, I'm Daisy, I'm hot, young and I like to party. I own a Suburban.

    Do these glutes make my butt look big?

    Daisy is a 4 year old Pitbull mix and about as dangerous as a glazed doughnut. ...
  16. Replies
    29
    Views
    5,097

    My 99 Burb Wipers did the same thing. My 99...

    My 99 Burb Wipers did the same thing. My 99 Dakota R/T wipers did it too. My 2007 Mustang wipers did not.

    The Mustang came with Bosch Icon style blades on it as most upper end vehicles in the...
  17. Replies
    68
    Views
    3,808

    Ok, cool. I wouldn't think pro's would set the...

    Ok, cool. I wouldn't think pro's would set the block on dirt. Yeah, there's a lot of terminology issues if one is not used to building. The slab also sits on the footing around its edge, and...
  18. Replies
    68
    Views
    3,808

    But they did pour a footing for those walls,...

    But they did pour a footing for those walls, right? footing/foundation, same thing.
  19. That part, I will go along with. In fact don't...

    That part, I will go along with. In fact don't even throw a light switch.

    For the rest of it, it is probably a moot point, or at least a toss up. Compressed air is a lot faster than a vac, but...
  20. The CVT isn't very new technology. Leonardo Da...

    The CVT isn't very new technology. Leonardo Da Vinci came up with it 500 years ago. Somebody got around to patenting the CVT in the late 1880's. They have been using them in lawn tractors, drill...
  21. Replies
    4
    Views
    354

    There is no stress on the sway bar unless the...

    There is no stress on the sway bar unless the truck is parked with one wheel on a hump. If you jack up one wheel then you are applying stress to the sway bar, aren't you?
  22. Then do what you just did, in the proper forum...

    Then do what you just did, in the proper forum per your subject. You just started a new thread so do it again.
  23. Replies
    3
    Views
    428

    With the amount of money involved, if the tire &...

    With the amount of money involved, if the tire & wheel shop won't do a test fit, then shop someplace else.

    Anyway, 31x10.5's fit fine with no lift kit from the OEM. You have 2", so there should be...
  24. Replies
    11
    Views
    619

    yeah, but that is mixed with mineral oil and sexy...

    yeah, but that is mixed with mineral oil and sexy smell stuff.
  25. Replies
    2
    Views
    259

    With a lot of miles, say above 100k, you are...

    With a lot of miles, say above 100k, you are gonna have a lazy lifter or two, especially when it is cold outside. They may tick a bit until the oil gets all warm and flowie like. My '99 has been...
Results 1 to 25 of 377
Page 1 of 16 1 2 3 4