Type: Posts; User: browenb
Search: Search took 0.00 seconds.
03-18-2014, 08:03 AM
The obvious answer is ... how large is my pocket book... but input from you guys would be appreciated.
I believe my Z71 should have a 4l65e, that being said, I haul my cars to shows, tracks, and I...
07-08-2013, 06:59 PM
Wanted to Buy 36mm front sway bar for my 04 silverado 1500
let me know what you have and how much you want.
txt to 506 663 8957 or email email@example.com
04-05-2013, 10:40 AM
Ordered 32mm replacement poly bushings only to find out I have a 30mm bar, and no one has listings for this bar up North in Canada...
Anyone ever here of this before? why would the Z71 I have get...
Anyone ever try this? do the holes in the frame for the bushings line up? From what I understand, I've got a 30MM Bar on my 04 Z71, plowing this winter finished it's bushings off, figured I'd upgrade...
06-20-2012, 05:28 PM
You think that might throw a code? I am due to change all the fluids again in about 30,000 Kms.
In all honesty, I can't complain about the truck, most of these up here on the East Coast of Canada...
06-20-2012, 10:49 AM
Damn, ok, so I'm back to hauling it into the dealer and a $120 bill just to find out which component it is then...
Thanks for the heads up RayVoy, maybe it's time to transplant this 8.1, trans,...
06-19-2012, 08:37 AM
So, my '04 Silverado, Z71, 4.8, extcab, that I have just rolled 306000 Kms (190.139.6 Miles) on has Finally given me the 'Service 4WD' on the dash.
I've read through the other posts, and spoke to...
01-26-2011, 09:40 AM
And now I need a door handle... This is on the passenger side of the truck, and that rear door gets used much more than the drivers side...
Since the handle broke though, I've had to use the...
Sticky: This is kinda neat...
From there site:
'There are 8 2004 SIL 1500 EXT CAB STD BOX vehicles (0.001%) matching your exact options list. There are 20 (0.002%) with at least as many options.'
Kind of neat to know there...
Well, I've decided to go with a set of EBC Yellow Stuff pads.
They are supposed to have the greatest bite of the EBC pads.
I took a look at my rotors, they look to be fine, I don't experience...
What I've heard is that the slotted rotors wear out the pads much quicker then simply the cross drilled / drilled. Can anyone atest to this?
As far as the extreme duty goes, is that what is found...
It's time to replace rotors and pads on my 04 Silverado.
I'd like to increase braking performance without having to change calipers, or tire size.
I've read negative and positive posts about...
someone ran into the front of my truck.
Looking for a replacement bumper, with brackets.
Or an aftermarket bumper if the price is right.
I'm really not worried about ride quality, as the ride now is pretty weak, and could stand being stiffened up.
I need to know if there is a diffrence in torsion bars, other then the index keys....
Well, I took the weekend to replace the actuator, as the original was bad, however the replacement did something weird.
When I turned the truck on, it went wide open, and would not change possition...
That's exactly what it was.
Drivers side one is toast, passenger's side electrical was corroted, I cleaned it up and it's back to working. I'm not liking this truck more and more.
Great, Thank you for the help, I'm hopping it's not that, as it's pretty pricey. But if it solves my problem with the lack of heat, then I'll pay to get it fixed.
Thanks again for the info. I'll...
Any idea on where to check this function? I'm at a loss.
Has anyone tried this?
Mainly, I want the stance, but I'd also like to have the ability for the extra load capacity.
Also, are there any diffrences between the 2500 and the 2500 HD Springs and...
12-09-2008, 07:01 AM
Just so I'm not confused, these are not the try-folding covers?
He's correct, just replaced the one in my truck a few months back. It's about a $50 part here in Canada, and instals in about 5 minutes.
I'm going to get flak for this, but I'm always using a hammer and nail to pre-drain the oil filter before removing it. Just a quick tap in the bottom corner of the filter lets the oil that is in it...
I hope this is a quick fix.
Little run down.
Replaced engine last March due to cracked head on original.
Replaced alll fluids then, had heat since.
Lost heat controls over summer,...
12-09-2008, 06:15 AM
The flashing Service Engine soon light happens because of the RPM's your running your engine up to. If you look at your oil pressure gauge while driving at higher rpm, it makes the service engine...
1/2 ton prefered, 3/4 ton is also interesting.
Needs to have title so I can get it accross the border and fix it up.
I'm in the east coast of Canada, so closer the better, but not turned off by...
Results 1 to 25 of 39