GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER

Search:

Type: Posts; User: mhypertext

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Done buy MOOG all the way I bought cheap upper...

    Done buy MOOG all the way
    I bought cheap upper control arms.. The nut that goes on the ball joint has 3 presses on the end of it making it super hard to turn and not brake the hex tool insert on...
  2. no not yet i had to overnight the correct ball...

    no not yet i had to overnight the correct ball joints from RA monday they will be here toady after tons of research it appears the NBS LT have aluminum lower control arms. Once u get the tire off and...
  3. so any ideas on how to press out the lower ball...

    so any ideas on how to press out the lower ball joint... i am assuming it presses out toward the ground.. but on top it ppears the factory flared the top of the ball joint or there is somekind of...
  4. On my 07 the uppers are non servicable parts no...

    On my 07 the uppers are non servicable parts no grease inserts. But yeah i am just gonna change them my self this weekend. Bought them from a local autoparts store Lifetime warranty which beats the...
  5. I checked them with the dealer they are bad.. i...

    I checked them with the dealer they are bad.. i am the second owner i dont think the first owner kept up with maintance..
  6. Replies
    17
    Views
    2,102

    man if you are tight on money i would leave the...

    man if you are tight on money i would leave the truck alone. When you raise it up its puts more strain on you front end.. The larger tires will change all your shift points making the transmission...
  7. 2007 NBS tire shop says my ball joints are shot upper and lower only 76k miles

    So i have a 2007 nbs ext cab 2 wheel drive silverado. Went to get it aligned and they said nope you upper and lower ball joints are shot. Wierd my truck has 76k miles on it. So i took it to the chevy...
  8. Replies
    14
    Views
    1,495

    Ouch that sucks bro hope all is well.

    Ouch that sucks bro hope all is well.
  9. Walmart NeverStart

    Walmart NeverStart
  10. Replies
    14
    Views
    1,495

    i don't know much about the motors it was a stab...

    i don't know much about the motors it was a stab in the dark. could just be timing and the plugs are firing way early and trying to push the pistons back wards making it sound like a diesel
  11. Replies
    4
    Views
    665

    you are prolly just a tooth or 2 off

    you are prolly just a tooth or 2 off
  12. Replies
    10
    Views
    2,494

    sounds like the piston is sticking in your valve...

    sounds like the piston is sticking in your valve body
  13. Replies
    4
    Views
    956

    yeah check your grounds also once its started how...

    yeah check your grounds also once its started how many volts do u have at the battery
  14. Replies
    4
    Views
    665

    Yes Number on the the Compression stroke. Stick...

    Yes Number on the the Compression stroke. Stick you finger in the spank plug hole to block it off when air pushes your finger out thats the compression stroke then just check your distrib and u...
  15. Replies
    14
    Views
    1,495

    when you had it rebuild did you have the heads...

    when you had it rebuild did you have the heads decked and the block??? jsut wonder if the valves are hitting the pistons
  16. Replies
    8
    Views
    4,463

    bad grounds dont usually blow fuses they just...

    bad grounds dont usually blow fuses they just cause stuff to not power up. check you O2 sensor harnesses underneath the truck se if they are shorting out on something. its a stab in the dark but u...
  17. Replies
    3
    Views
    681

    let me ask you this did you put oversized tires...

    let me ask you this did you put oversized tires on it?
  18. Replies
    5
    Views
    3,151

    Honestly i prefer Off brand mufflers I hear...

    Honestly i prefer Off brand mufflers I hear flowmasters everyday everyone has them and they all sound the same
  19. Pull you dip stick if it smells burnt you need to...

    Pull you dip stick if it smells burnt you need to rebuild it



    i am sure you have a 4L60E that being said they are junk as far as 3 and 4th. its prolly burnt up and needs rebuilt. i recommend...
  20. Replies
    1
    Views
    406

    sounds like your pinion angle is way off man. i...

    sounds like your pinion angle is way off man. i don't know much about 4x4 have u modified the rear-end at all?
  21. Replies
    1
    Views
    2,019

    2000 silverado bumper???

    I have a 2000 that heas been wrecked the guy i bought it off of put a 2005 style front clip on it.

    The impact brackets ( frame Horns) look the same for a 2000 and 2005. however i also have the...
  22. Replies
    3
    Views
    1,542

    Well man it goes like this if it is not broke...

    Well man it goes like this if it is not broke dont fix it it. You start making more power you are going to start breaking other things.

    But if you want to make more power put underdrive pully's...
  23. Replies
    3
    Views
    756

    Yeah they are s shaped. Also did you hook up a...

    Yeah they are s shaped. Also did you hook up a thermostat if so how did you do it
  24. Replies
    3
    Views
    756

    Procomp Dual 16" fans

    Will the ProComp Dual 16" electric fans keep my 5.3 cool. They are rated at 2500 CFM which i am sure is not true but i plan on running both on high 24x7.

    Also i have the 34" radiator

    I mean...
  25. Replies
    9
    Views
    1,075

    well the short asnwer is the truck has a body...

    well the short asnwer is the truck has a body lift and i dont have the fan or clutch. I bought the truck as it sits now i am doing damage control
Results 1 to 25 of 31
Page 1 of 2 1 2