GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER

Search:

Type: Posts; User: mfklein24

Search: Search took 0.00 seconds.

  1. Thread: What seats

    by mfklein24
    Replies
    1
    Views
    468

    As far as i know all of the regular cabs...

    As far as i know all of the regular cabs 1988-1998 have the same floor pan. So any bench should fit as a bolt on. now if you want a 60/40 it will need more holes drilled (not a big deal i did this to...
  2. Replies
    3
    Views
    570

    well i have a buddy that got some of those good...

    well i have a buddy that got some of those good HID look a like bulbs on his ford f150 and it made his lights a lot brighter. If i were you i would go for it sometimes you can find the lights on ebay...
  3. Replies
    5
    Views
    1,797

    the housing around the fan motor may have a small...

    the housing around the fan motor may have a small hole or crack in it. just a thought, you could get a smoke pencil and hold it up there and see if it gets blown around or sucked in
  4. Replies
    3
    Views
    926

    Bump! anyone even alive on this website?

    Bump! anyone even alive on this website?
  5. Replies
    3
    Views
    926

    HVAC controls screwing up? 89 chevy

    Hey my HVAC controls keep screwing up on my 89. Sometimes it will just flash at me when i go to change from head to feet or defrost. And recently when i move the temperature selector that will also...
  6. Replies
    3
    Views
    1,700

    thats a good question i am not sure as i have one...

    thats a good question i am not sure as i have one of those too. But i just put on some 8 inch wide rims off of a mid 80's suburban. It looks a lot better IMO
  7. Thread: Gas question

    by mfklein24
    Replies
    5
    Views
    663

    you can also just pull the bed off the truck if...

    you can also just pull the bed off the truck if you have a group of friends, that makes getting axcess to the tank and pump easy. i did that on my s10 and we did it 3 times on my dads silverado 96...
  8. Thread: Gas question

    by mfklein24
    Replies
    5
    Views
    663

    Yeah i would suggest getting the old fuel out and...

    Yeah i would suggest getting the old fuel out and then putting in new fuel and a fuel filter and see what happens before you have to do the pump but it won't hurt to do it all. My s10 i got from a...
  9. Replies
    5
    Views
    1,092

    well if you have to replace the key cyinder i...

    well if you have to replace the key cyinder i just did it so i can shed some light. You have to pull the steering wheel off with a puller. Then you have to compress the steering column lock plate...
  10. do you have a picture of these covers? i am...

    do you have a picture of these covers? i am interested. also where are they located?
  11. Replies
    1
    Views
    976

    HVAC controls not working '89

    Hi, i noticed on my 89 chevy pickup that my HVAC controls only half way work. the A/C button doesnt' do anything and neither does the defrost button. It doesn't even show it on the display and...
  12. Replies
    41
    Views
    5,263

    Also i was wondering how loud the interior noise...

    Also i was wondering how loud the interior noise is with the super 44? If someone has an audio clip of this muffler on a 4.3 it would be nice to know how it sounds thanks.
  13. Replies
    41
    Views
    5,263

    thanks, i noticed today while i was under the...

    thanks, i noticed today while i was under the truck that the cross over from the drivers side manifold was hit and is restricting flow by half. So my first plans when i got this truck was to do what...
  14. Replies
    11
    Views
    1,649

    Yeah, i will get some pics up soon. As of now...

    Yeah, i will get some pics up soon. As of now though i have it up on jack stands working on the front end. I need to replace the upper control arm bushings as they are dry rotted out. I am also doing...
  15. Replies
    11
    Views
    1,649

    Mike from Michigan

    hi there! well i come here because of sadness but also joy. lol i am no stranger to custom automotive work. I spent over a year working on a 91 s10 that i got from my neighbor, it was completely...
  16. Replies
    2
    Views
    3,242

    Thank you. I will post pics later i just brought...

    Thank you. I will post pics later i just brought it home a few hours ago. the body has some dents but no rust underneath. It was a flordia truck untill this spring. This summer i will be repainting...
  17. Replies
    41
    Views
    5,263

    I just bought a 1989 chevy 4.3. would a...

    I just bought a 1989 chevy 4.3. would a flowmaster 40 series sound the best on it? i want a decent idle rumble but really when i stomp on it. I plan on doing dual exhaust but probably not full dual...
  18. Replies
    2
    Views
    3,242

    1989 c1500. How to change speedo?

    I just purhased a 1989 chevy reg cab 2wd 4.3. I was wondering if i put larger tires on it how i can get the speedometer back in specs? also is it cable driven or electronic? I don't really like the...
Results 1 to 18 of 18