Welcome to the GMTC - Chevy Truck Forum.
     

Search:

Type: Posts; User: rg79

Search: Search took 0.00 seconds.

  1. Replies
    14
    Views
    920

    If you are taking a trip to the "boneyard" I...

    If you are taking a trip to the "boneyard" I would just get the whole axle, remembering to match gear ratio, or know what the new axle is. If you're going to just change gears and carrier, your money...
  2. Welcome to GMTC For your oil leak, you might...

    Welcome to GMTC

    For your oil leak, you might check the oil pressure sender. Those things are bad about leaking. I think its still mounted right next to the distributor, usueally a pretty cost...
  3. My 05 ccsb had this issue, and it turned out to...

    My 05 ccsb had this issue, and it turned out to be the driver front speaker. You could also check the wiring going through the door for damage.
  4. Replies
    7
    Views
    307

    Welcome:great:

    Welcome:great:
  5. Replies
    8
    Views
    377

    Welcome aboard. i Think as I have you will find...

    Welcome aboard. i Think as I have you will find a wealth of knowledge here!:great:
  6. Replies
    14
    Views
    920

    The advice on the locker is spot on....I would...

    The advice on the locker is spot on....I would never go back to an open diff! I'm not sure why some don't like the G-80 though. I've never had a problem with mine. My 05 ccsb Z71 has been treated...
  7. Replies
    1
    Views
    153

    To my knowledge the dash has to be removed for...

    To my knowledge the dash has to be removed for the core to be replaced. you might check under the hood on the pass. side of the firewall just to make sure your drain tube hasn't been turned upward. ...
  8. I would agree with all aforementioned posts. My...

    I would agree with all aforementioned posts. My 05 ccsb did this and the ABS light would come on . Turned out to be a bad hub bearing assy. If funds allow I would replace both. The other one is...
  9. Replies
    0
    Views
    236

    2009 Harley FXDC super glide custom

    2009 Harly FXDC (2013-03-14 20:22:47)
  10. Thread: For Grins

    by rg79
    Replies
    2
    Views
    322

    For Grins

    Here's one to chomp on. 2005 ccsb Z-71 5.3, 4l60E, G80....Wondering about the difficulty level and/or possibility of a bolting in a newer 6L60E in place of the 4L? Thinking it would have to have...
  11. Thread: Intro.

    by rg79
    Replies
    6
    Views
    408

    I'm looking more toward a leveling kit than lift,...

    I'm looking more toward a leveling kit than lift, but not sure of what height to go with. I would like to upgrade to a 305 width tire (running 285 now). Also considering fabing a center console to...
  12. Thread: Intro.

    by rg79
    Replies
    6
    Views
    408

    Intro.

    Hello, I'm new to this forum buisness. I've found that being a member of GMTC will give a wealth of good information,as well as being a great way to share my own experience. With the current...
  13. Thread: castech heads

    by rg79
    Replies
    0
    Views
    417

    castech heads

    I've recently gotten my 05 ccz71 paid off, only to realize that I am one of the doomed truck owners with these heads. Any ideas if my block sealer idea doesn't work. And what's the best way to...
  14. Replies
    24
    Views
    2,166

    Unplugged is correct. The wires have a tendency...

    Unplugged is correct. The wires have a tendency to rub and short out or get cut in two. G.M. will try to sell the complete shifter when all you need to do is repair the broken wire and I would...
  15. Replies
    4
    Views
    357

    Disconnecting the battery cables and holding...

    Disconnecting the battery cables and holding together for 30sec or so will reset the ecm. Also check the pump relay and like already stated by Pikey, check the pressure at the rail. most...
  16. Replies
    0
    Views
    513

    2005 Chevy Silverado 1500

    2005 Chevy Silverado 1500 (2012-12-04 15:07:10)
Results 1 to 16 of 16