GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER

Search:

Type: Posts; User: leftywoody

Search: Search took 0.01 seconds.

  1. Replies
    67
    Views
    95,483

    Sticky: You do not have to remove anything . There is...

    You do not have to remove anything . There is plenty of room to do this while it is installed . At least on my truck there was . Please use a new or newer drill bit that has a pilot tip on it . That...
  2. Replies
    67
    Views
    95,483

    Sticky: Update . Just added grease at 3000 miles since...

    Update . Just added grease at 3000 miles since installing the grease zerk . The foam rope is still in place and has hardend a bit . I can still reach my little finger up into the shaft and feel it...
  3. I am sure it is bolt on . I think you could...

    I am sure it is bolt on . I think you could handle it up to a point . That point gets a little hairy when you start to align the sheetmetal back up so the hood closes properly and the gaps between...
  4. Replies
    67
    Views
    95,483

    Sticky: I put a couple hundred miles on this truck and...

    I put a couple hundred miles on this truck and did a check on the foam rope . It hasn't budged . I packed it pretty tight and I think it has expanded enough to hold in place . The grease is also...
  5. Replies
    29
    Views
    2,717

    Is there now a plan B

    First , thank you for your service . Second ,if you are going to have to fix the trans . That may be another 1800 bucks give or take . This may be the selling point for the future buyer or the reason...
  6. Replies
    67
    Views
    95,483

    Sticky: Update I took my truck out today and drove it...

    Update I took my truck out today and drove it around our crappy back steets and downtown . It was so much smoother and more quiet and graceful in it's handling that I thought I was driving something...
  7. Replies
    29
    Views
    2,717

    You could come down even more in price and...

    You could come down even more in price and attract a new set of lookers or get the old ones to come back again . I just sold my 96 half ton Chev. by taking it to a car broker located at the edge of...
  8. Replies
    67
    Views
    95,483

    Sticky: Skinner , I bought a 2007 GMC 1500 with 90,000...

    Skinner , I bought a 2007 GMC 1500 with 90,000 miles on it . And as I became more familiar with the truck I started to notice that click or light clunk in the steering shaft . I went through your...
  9. Replies
    3
    Views
    787

    Well the u's are fine . And the noise I heard...

    Well the u's are fine . And the noise I heard from worn u's is much differant than the noise I get from this truck . I have found many articles on frame vibration or frame beaming . And replacing the...
  10. Replies
    3
    Views
    787

    vibration at 40mph

    I have a 2007 GMC 1/2 2wd V6 Auto 96000miles . I just bought it last month . It runs and drives great with the exception of a very light vibration at 40mph . If I am driving through slow traffic and...
Results 1 to 10 of 10