GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER

Search:

Type: Posts; User: Landascott3

Search: Search took 0.00 seconds.

  1. Ignition control module

    Ignition control module
  2. Timing is dead on - - - Updated - - - Found...

    Timing is dead on

    - - - Updated - - -

    Found a vacuum leak tho... Fingers crossed

    - - - Updated - - -

    Still will not start... If I only crank it a normal amount of time it does nothing if...
  3. I followed all the steps to set the timing how...

    I followed all the steps to set the timing how could I be doing it wrong... I set it to tdc on the compression stroke and slid the distributor in... It says the distributor only goes in one way so...
  4. I believe so... It sounds like it diesels out...

    I believe so... It sounds like it diesels out after you stop cranking it over but it won't start
  5. Can't get my 2000 chevy s10 v6 4.3l to start

    Has spark, has fuel, has compression, battery works, new starter... I tore it down to replace the intake manifold gasket because it was leaking... There was coolant in the oil... I replaced the...
Results 1 to 5 of 5