Type: Posts; User: kchfiveo
Search: Search took 0.00 seconds.
I don't mean bogging. When I feel it happen I immediately take my foot off the accelerator. Now that you mention it, I had not looked at the tach to see the engine speed when it happened. I'll check...
I have a '97 GMC Sierra 5.0 5-speed M/T. Recently, whenever I accelerate quickly in first and second gears I experience a complete loss of power. I'm worried that my clutch has worn down...
I replaced the knock sensor connector, and now my only problem is the p0300 - random misfire
Sorry for the delay,
I don't have access to a compression tester. But today I will be replacing the dizzy cap and rotor, ignition wires, and knock sensor.
- - - Updated - - -
Yes, and one had the electrode broken off :gasp:
Update! replaced all the spark plugs and most of the shaking is gone. it idles very low (500-900) now and dies unless you give it some gas.
With what you just said, I think the timing is off because...
I have a 1997 GMC Sierra 5.0 with 132k miles. It shakes (drastically more when accelerating) and its throwing a p0300 and p0327 codes. has a new fuel pump and filter. any ideas on what could be...
Results 1 to 7 of 8