Search:

Alright, so I figured out the problem. It was the PCM b fuse (20a). This fuse was not in the wiring diagram so that is why I couldn't find it, Plus when i checked all the fuse's i happen to over look...

tried it, swapped it out with my truck, and both work just fine. What i'm gonna try now is seeing if the purple wire gets ANY power and if so, check at the lead on starter, if thats working, then i...

So this is what i figure out tonight. ALL fuse's and relays work. I am getting 7 volts from the bolt that is the main lead for the starter ( batter to starter) the purple wire( the wire that comes...

Im gonna certainly try that. I haven't checked the park, neutral switch yet.

I know there is power going to it and I know the starter solenoids work. but I believe i checked all the fuse's. Ill be double checking it on monday. I also went to the ignition key and Im getting...

So i got an 03' 2500HD gmc sierra 6.0

This is my issue-
When I turn the key, nothing at all happens, Lights turn on but starter wont tick.
The battery is good, fully charged.
I checked all...

So i currently have the stock speakers in my 02 sierra. I am looking to replace with with some better sounding speakers that add a little more oomph to the bass. I don't want to had a sub-woofer to...

So i believe one of my cats if clogged, because my post 02 sensor is getting a low signal. I replaced the sensor twice and the engine light still comes on. So I'm looking to replace both cats. What...

This may not be in the right section, but its the msot viewed.

What are some good brands of HD leaf springs? I got the stock 3 leaf spring set for my 02' 1500. I'm looking for a set that has...

Alright thank you! I look into getting one within a couple of weeks!

So I'm looking at a programmer to boost power and torque (pretty much like everyone on this site) I"m not looking for anything over the top nor do i wan't anything that is made from chop sticks (if...

Are there any shops in Minnesota that will do lift kits. I'd do it myself but i'd rather have the warranty behind it in case I missed something or if something broke. I heard of the one in burnsville...

There are times when i do use 4wd on dry pavement, such as trying to pull the boat out of the boat ramp and turning. But as for today, there was a good layer of snow on the ground and i kept getting...

Thank boonduff for the options. I'm also looking for one that works great with the snow.

I alos noticed my front dif acts funny in 4 wheel drive. My turning radias is cut in like 1/3.. If i go to...

Almost a year ago. I might change it again this spring, and take a look at the dif. but, i kinda want a new diff though. ones that are indestructable and actually work.

I changed out the fluids last year and I did top it off. This only happens when one tire is on slippery and one isn't and then when it does get traction i still get clunking noise, and then goes...

Alright, so i experienced this for the first time a week ago. I was going up a ramp ( that kind that goes in circles) and i started hearing this horrible clunkcing noise in my dif. my left tire was...

Alright sweet, thanks for the inputs! I appreciate them!

the tire size I currently have right now is 265/75 16 (standard). Im looking at getting some new tires for this winter (minnesota winter) and I want some amazing tires that will help my truck plow...

I got an 02 sierra 5.3 v8. What are some good brands on headers? I know nothing about aftermarket headers so im hoping you guys have enough expierence to help me. I want some more torque at lower...

What ever you do, look into getting a xlerator muffler. single in dual out. cat back. on top of that look into getting pipes that have 3 1/4 tip

I love them!! thanks! How long does the shipping usually take?

(02 gmc sierra 5.3 v8)So im looking to get some really nice looking mud flaps that are about 24''x14'' or something around that size. I am also looking to get a stainless steel piece on the bottom...

Where or how did you get yours set up. I'm looking for the same set up as you do, but don't know what to look for. and is it street legal?

is there a certain series of magnaflow i shouyld go with?

and also i forgot to add, im looking for that pointed end look on the tip. looks like a 45 degree angle.