Type: Posts; User: brockrg
Search: Search took 0.00 seconds.
10-25-2012, 07:46 PM
First, Do you have the spark plugs in or out. Out will allow it to turn over easier but if you did everything right on the rebuild I would start by checking the timing. Bring number 1 cyl up to top...
What is causing my truck to break into a shutter while under load. If towing a load or running down the highway empty and climbing a long grade the truck will start to shutter after trying to...
09-09-2012, 07:17 PM
Thanks DPeter, I have already connected a fuel gauge to the windshield wipers and ran it under load and during the failure mode also. The pressure increased to 58-60 lbs during the load period and...
09-08-2012, 09:32 PM
Ok, I have replaced the spider, cats, trans filter, cleaned the mass air flow and entire air intake system. The fuel pressure idles at 52 psi and will reach 60 on demand, so what is causing this...
Hey guys I'm new on here but, I had the same problem with my 98 5.7. The intake and head gaskets were the victim of Dexcool. The intake was leaking antifreeze into the cylinders just enough to dampen...
09-06-2012, 04:17 PM
Wouldn't the mass air flow sensor or the o2 sensor throw a code. Mass air flow was a concern of mine thinking that I may be starving or choking the air flow.
09-05-2012, 09:18 PM
What will cause my truck to fall flat on it's face while going up a long incline. It seems to run fine under normal conditions but when hauling a load or lately without a load it will start to...
Results 1 to 7 of 7