GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER

Search:

Type: Posts; User: BRB46

Page 1 of 9 1 2 3 4

Search: Search took 0.00 seconds.

  1. They do look good. I did mine in blue and they...

    They do look good. I did mine in blue and they too are on the almost too bright range. These LED's operate on a very specific voltage and as you know they cut out before they dim. I tried connecting...
  2. I think if it has only been a week now would be a...

    I think if it has only been a week now would be a good time to add top soil. Just make sure that the root side of the sod is in complete contact with the soil or you will have dead spots in a few...
  3. Replies
    5
    Views
    368

    I wouldn't recommend cutting the crossmember. You...

    I wouldn't recommend cutting the crossmember. You would not want to weaken the structure. I had trouble with one of mine when I changed them. I ended up beating it out with rebar by driving the...
  4. I have an '06 and mine are wet where the rubber...

    I have an '06 and mine are wet where the rubber meets the metal. I bought all three lines at the dealer for $94.00. Haven't changed them yet but watched some how to videos on Ytube. It doesn't look...
  5. Replies
    6
    Views
    382

    [QUOTE=j cat;614688]are the front CV joints...

    [QUOTE=j cat;614688]are the front CV joints straight ?

    the keys can be changed to increase the lift. also the ride is harsh it the lift is too much no up bounce.

    The truck is not here now so I...
  6. Replies
    6
    Views
    382

    Thanks for the replies. The keys don't appear to...

    Thanks for the replies. The keys don't appear to be cranked up all the way as there is about 1" of thread remaining. Truck still sits with a rake but not sure if it is at factory setting. Any idea...
  7. Replies
    6
    Views
    382

    Positive Camber issue

    My son just purchased a 2006 Silverado 1500. The front wheels have a noticeable camber issue. Truck had a plow on it with the previous owner. Since been removed. Took it to a respectable alignment...
  8. Thread: Torque Specs

    by BRB46
    Replies
    5
    Views
    415

    Thanks for the reply. Looks like I might have to...

    Thanks for the reply. Looks like I might have to invest in one of those.
  9. Thread: Torque Specs

    by BRB46
    Replies
    5
    Views
    415

    Torque Specs

    Is there a manual that has torque specs listed for all the different nuts and bolts. ie: suspension,drive train,engine. Basically any major fastener on these great trucks we drive.
  10. Replies
    14
    Views
    929

    I am having a similar issue but my ABS activates...

    I am having a similar issue but my ABS activates when going down my steep driveway.But not icy or muddy. What type of scan tool do you use to read these codes. I'm guessing a wheel sensor is to blame...
  11. There are some on eBay but not sure what brands....

    There are some on eBay but not sure what brands. There is always the dealer option. GM parts direct I think is another.
  12. Replies
    8
    Views
    428

    6000K will have a slight tint of blue. 5000k is...

    6000K will have a slight tint of blue. 5000k is just about pure white light. You should be able to get the whole kit. Make sure you get the relay kit as well. It should be plug and play except for...
  13. Replies
    8
    Views
    428

    That is the one I have and it does lift it a bit....

    That is the one I have and it does lift it a bit. It comes with 3" blocks for the back, factory are 2" and the keys for the front lift it to match. If you didn't use the block the front would be...
  14. Replies
    8
    Views
    428

    It's a 2007 classic according to his garage. You...

    It's a 2007 classic according to his garage. You can get the Rough Country 2.5 leveling kit with blocks, keys, shocks and hardware for $200.00
  15. Can I ask what a relearn might cost and what type...

    Can I ask what a relearn might cost and what type of shop might do something like that. I don't have any mechanic friends so a shop would have to do mine. And what is RxP? I think i want to try a...
  16. Thread: Headlights

    by BRB46
    Replies
    5
    Views
    417

    With the different lights that are now not...

    With the different lights that are now not working it would likely be more than one fuse. They all have the switch in common so maybe the plug didn't seat properly when you changed the switch. Also...
  17. update

    I was able to take out the cluster and install the LED's. there was plenty of room to use the ones I had with built in resistors. Entire process took less than an hour. I will need to remove it again...
  18. I am now down to 4% on OLM. MPG's are in the 380...

    I am now down to 4% on OLM. MPG's are in the 380 range now. Will likely be changing oil next weekend so I will see if after the reset, they improve.
  19. Nice job and writeup. I am going to be doing...

    Nice job and writeup. I am going to be doing mine in blue LED soon.already have everything done but the cluster. How much clearance is there from the solder points to the back of the piece with the...
  20. Replies
    16
    Views
    943

    Cleaning 101. Might be scary sitting on that. Let...

    Cleaning 101. Might be scary sitting on that. Let alone the aroma it must have had.
  21. Replies
    11
    Views
    619

    I will be mixing up some of this to use. Thanks...

    I will be mixing up some of this to use. Thanks for the info.
  22. Replies
    403
    Views
    35,973

    In the process of changing my dash lights to blue...

    In the process of changing my dash lights to blue LED. have everything done but the cluster at this point. very time consuming project as every one has to be un-soldered and redone. HVAC control was...
  23. Thread: Bestest wife!!!!

    by BRB46
    Replies
    11
    Views
    509

    You must have been delirious. Did you hit your...

    You must have been delirious. Did you hit your head recently? Haha!!!!!!!!!!!
  24. Replies
    9
    Views
    347

    That doesn't surprise me. The way society is...

    That doesn't surprise me. The way society is today, you need DOB check to purchase spray paint and i think there was another item that I bought recently that i needed my DOB for. Can't recall what it...
  25. Replies
    4
    Views
    293

    Sounds like you may have had the fluid go too low...

    Sounds like you may have had the fluid go too low and allowed air into the system. Bleeding the system should be done. See what happens after you do that. Keep an eye on the fluid as you bleed each...
Results 1 to 25 of 213
Page 1 of 9 1 2 3 4