Type: Posts; User: cruisnhard
Search: Search took 0.00 seconds.
10-11-2011, 08:37 PM
I live in Wisconsin so know all about the rust. I am actually hoping mine isnt as bad as yours on the fuel lines, but I think mine is leaking. Good luck with the project.
06-01-2010, 09:53 PM
So I ordered my long tubes today!
06-01-2010, 03:49 PM
That seems to be a good deal. With all electronics included. I paid the same amount and didnt get new vanes and stuff for the pump.
05-23-2010, 11:35 AM
Thats why I did my rebuild.
05-22-2010, 10:15 PM
If you are mechanically inclined then, I would definetly try it.
I spent about 700, but that was for upgraded internals, clutches and metals.
Get the dvd and the book. Also if it shifts good...
05-16-2010, 09:00 PM
So I did have some springs mixed up. It is back together and back into the truck. It drove good today once the pressure was up and the fluid was good. I am going to drive again tonight to give...
05-09-2010, 06:30 PM
I think I mixed up some valve body springs.
Is there a way to tell which ones went where?
Also on the 3-2 downshift solenoid there is two springs on that valve. How exactly do they go in? ...
04-28-2010, 12:08 AM
working on the valve body I broke a sensor, so I have to wait for a new one. I am going to go to the trans shop tomorrow to see if they have one laying around. I am also going to see if they will...
04-25-2010, 08:32 PM
well the internals are back together. The ony thing left is the valve body to be put back together.
I just took it up to the shop for the seals, and I also had them replace some bushings also. ...
04-18-2010, 02:54 PM
04-14-2010, 01:30 PM
so tranny is apart and I am starting to put back together.
How cheap would a shop do the teflon rings, or cn I do it myself with stuff found around the shop instead of buying the expensive tools?
depending on mileage, fluid change can help.
A trans cooler seperate from the radiator would help also.
03-29-2010, 06:12 PM
Almost got the trans out. Just one more bolt and it should be out.
By the way the trans fluid was blacker then black and smelled extremely burnt.
03-25-2010, 12:02 AM
cool man will do.
03-22-2010, 11:54 PM
What does the shift kit change?
Yeah I saw the thread and it looks like it will help. If I dont have the tool I will take it to a machine shop to have it pressed on or applied.
shouldn't change it at all as you are still using the factory suspension.
that sounds like a solinoid or valve body, not internal.
I would get a second opinion.
03-21-2010, 07:35 PM
Well I have burnt up my 3-4 clutches, so I have decided to rebuild.
I ordered everything from PATC down in Louisiana. I have hopefully ordered everything I need. It has been quite a bit of time...
North of Milwaukee. I work in out of New Berlin. Only been here since may of last year. Loving it. I am however in need of some 4l60e help, going to do a rebuild. Also would love to go wheelin...
M30 on the side of the trans would indicate a 4l60e/700r4. i do believe 1993 and older is 700r4 and 1994 and newer is the 4l60e.
I have one on my 94 and dont fell much difference then an engine without one. It has been a while since i have driven without one though.
ps, it was on there when I bought the truck.
01-05-2010, 06:03 PM
what does the ecu temp sensor ohm out to?
awesome and clean.
I actually miss the Army the most. I have been thinking of going back active duty. I am happy now and would be happy with any of the three, Army, mechanic, or Engineer.
12-23-2009, 09:18 PM
What is base timing supposed to read with a timing light?
Results 1 to 25 of 31