Type: Posts; User: runsdeep0826
Search: Search took 0.00 seconds.
So my hubs won't lock in on my truck t case works
Spin the yoke and axles turn but no hub locking
Pulled the hubs back off
Is something missing?!
Cool thanks for the info....and if they don't lock and spin I assume I have a hub problem?
I have a k5 with 10 bolt and warn manual hubs
I replace bearing and calipers but I'm wondering if my hubs are working?
Can I jack the front axle lock them and spin yoke to spin wheels?
Well never had it max only 1/8 mile racing down here
6.33 at 106.....it ran 10.27 letting off half track (1/8) in the quarter
So I'd say 9.90 about 130.....but if u had more shed keep going and...
Imo the best filter is wix or k&n is the truck a Vortec? Cooler delete is a good idea
For better oil pressure reasons there's a t.s.b on these engine explain incorrect bearing tolerance on the last...
06-27-2013, 06:08 PM
Are the 10 series the small single chambers? I have them on a 78 z28 and there crazy loud for family I had a set of the 1k HP race mufflers on a impala that were that style single chamber small...
The only issue with dumping fuel would be drying the cylinders out
This creating low compression and most likely did cyl wall damage
Rebuilds are not bad if u do it yourself I've built several SBC...
New to the forum from south fl
Own 86 c10 drag truck
And 85 k5 mud truck build
Auto tech built 86 c10 with the wife big drag racing fans
Truck has 505 c.i. big Chevy dart pro 1s 700 lift roller...
Results 1 to 8 of 9