Search:

Folks, it really doesnt matter that your truck is painted in mexico or here in the states. Humans hands dont pain the trucks - robots do. They are setup to use the LEAST amount of material. Also,...

I remember seeing a thread on this issue but for the life of me I cant find it VIA search.

The issue is that the ignition key has become hard to turn at times. Trying to narrow it down to a key...

Yup, just remove the torx bolt(s). I dont remember if I had the plastic on mine - probably did - I didnt replace it.

Theres nothing wrong with fiberglass. I am not sure how the Cervani hoods come, but if they are not primed you will need to use a polyester(high build) primer to fill in the little voids. If they...

I like the top one. I was going to get that exact hood. I havent ordered it because I know it will sit around and I will never get a chance to get it in the paint booth!

You wont really know what the issue is until you pop the door panel off. The lock is an electrical part but there is a metal rod that runs from the locking mech to the door handle. Sounds like that...

Tucson.......

Hello GmTruckclub members!

Its been some time since I lasted posted, things have been busy!

I just wanted to share some bowties we hydro dipped for forum member jays87gn.

These are done in...

Well, you are in NY...your taxes are outrageous there...

I dont really see exterior parts have issues. Its the interior parts that seem to have issues. Arizona summers can be brutal on interiors.

What did you cost you? I have alot of customers who have issues with the 3m wrap coming up on the corners/edges after a year or so.

Havent you ever seen that bumper sticker....

"Yes its my truck....no I wont help you move!"

I am pretty sure the turn signals are controlled by the BCM on the NNBS style trucks...my )8 is anyway. I had the same issue ...had to add a resistor.

I would take them off. You will need to scuff them with 400 grit. You could also pick up a can of BullDog adehsion promoter and give them 2 light coats - 10 min dry time between coats. With the...

I have seen some guys disable AFM and not seen any reduction in MPG..just deepnds on your setup...i.e gear ratio, custom tune, etc...

So "it may" because not everyones truck is setup identical.

That is an incredible price.

@ curky : If you can find a hydrographic place near you, they can dip to a PC base. Most shops tho are probably going to charge $100 per wheel however. Still, you...

No worries..throw em out there! Ism not prefect so its good to get other info.

If someone wants to do the tails I charge between 50 and 90 bucks..just depends on what you want.

I dont think that ARS could even apply to ALL motor vehicles as there are OEM taillights that DO NOT even have reflectors not to mention the aftermarket ones that dont have reflectors.

From my...

Your taking about ars 28-929....that applies to trucks over 80 inches on width...tractor trailer s or tractors.

You are going to have to eat those items. I have never been a fan of radar detectors - and I never mount anything to my windshield and leave it. It is a big red flag that says " Hey look at my...

Typically shops are not going to go to the bare metal when repainting. Prep includes sanding and any body work that needs to be done - small door dings etc....

Once you have the car truck sanded...

X2 If you burn through to the base coat you have just committed yourself to repainting. If its your hood you will have to redo the entire hood because yo wont be able to spot in the clear and have...

This a common issue. There are severla fixes...you will need to see if its giving you a code or not. There are sometimes wheel sensors that go bad and maybe acting up due to temps..who knows.
...

I guess it depends on what you have heard - sound wise....I do know, that no matter what best buy puts in your truck it can be done better for almost the same money.

X2 JL Audio...