Type: Posts; User: nonnieselman
Search: Search took 0.00 seconds.
On a LSx engine you line your cam sprocket at 6 oclock and your crank sprocket at 12 oclock. If its a I5 or I4 in your canyon then I have no clue. Never been inside one of those engines.
06-20-2013, 04:22 PM
on the 1999-2007 classic the wheel bearings are easy to change. Remove caliper, remove 3 bolts on rear side of knuckle. Push bearing assembly out, insert new and tighten the three bolts.
06-20-2013, 12:45 PM
yea thats a good start.. mine lasted till 230k before i had to put wheel bearings on it and i just did tie rods at 275k miles.
They can be a big pain to break loose to be prepaired.
06-19-2013, 04:35 PM
Twin Ram Air :D
- - - Updated - - -
Your goin to have to get creative if you want to do the ram air from...
06-19-2013, 04:28 PM
Only problem with E85 or any ethanol fuel is that our tax dollars pay for it then you have to buy it again. Subsidies that farmers get to grow fuel instead of fuel.
$7billion in 2006...
06-19-2013, 03:15 PM
Wet grass is goin to be rough to get traction on with any tire. my buddy got stuck in a 4wd on a wet grass hill with some old tires haha.
But a good positive traction unit and weight are your...
06-19-2013, 02:42 PM
Also if your trans temp is heating up when the torque converter is locked, you have other issues to be worrying about.
Mine can be 150* goin thru town and soon as i get on the highway or...
06-19-2013, 02:40 PM
Whats the under side of that hood look like?
Best bet is goin to be making some rams that go from the hood to the air box thats enclosed.
These are suppose to be some good thermal switchs..
i bought a couple of them for my transmission cooler lines on my Samurai so it...
06-14-2013, 03:32 PM
P0351-p0358 is the coil packs code.. so it could be a bad ground wire.
06-14-2013, 03:29 PM
Ive been running Aeroquip Pushlok hose for about 7 years now and its some good stuff but expensive. worth it!
on my 2003 z71 tahoe i ended up just torching the idler and pittman off. And put all new stuff under there. Nothing would budge even with a 15# hammer.
I use Delo 400 15w40.
Its cheap and we have diesels with over 10,000 hours on them still goin. Plus we get it in the 55gal drums :D
This was last may when we went to the old 1/4 mile track they reopened
Just wanted to see what it would do before the turbo goodness starts happening.
First pass was a wicked 15.2@94 2.3 60'!!...
Posting up a nitrous thread in the performance forum now.
here is the PDF for all their info..
06-13-2013, 10:24 AM
All my vehicles have a Trucook 40K trans cooler.
I route the lines to the cooler and not the factory radiator.. see way too many factory radiator coolers leak and fill the trans with coolant and...
i forgot about my buddys car in missouri.. its a 2001 camaro with a LQ9 which is the higher compression 6.0. On E85 he made something like 1300 to the wheels. he bumped it up a lil more...
Airraid MIT tube and the factory box is your best bet..
- - - Updated - - -
Yea the sticker fit perfect...
but all these things do is tap into your IAT sensor and tell it that the Intake Air temperature is alot colder which increases timing but also dumps alot of fuel...
Your 5.3 should have a 190/191 .466"/.457" 114 LSA cam in it.. id suggest goin to the 212/218 or 214/220 on a 112-113lsa with your long tube headers.
IF you dont want to swap valve springs, dont...
Guy talked my buddy into buying one these things off ebay.
So he buys it and puts it on. I get a text message and he says his...
06-11-2013, 12:23 PM
Sorry, im a lil late on this.. but what did you end up doin?
That seller on ebay is just down the road from me but ive never heard of them.
your goin to need a cam in the 212/218 ish range for...
Yes all the LSx engines have hypereutectic pistons, and cast cranks.
If i had a old body style and my engine died, i would have surely went with a newer engine. you could do a 4.8 and a turbo...
06-08-2013, 07:50 PM
Yep. Here is theSchematic
I dont like hookin it up to the AC wire like that shows. Run it to the...
Results 1 to 25 of 65