GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER

Search:

Type: Posts; User: drumm14

Page 1 of 2 1 2

Search: Search took 0.05 seconds.

  1. Comp cams 212/28 lsa 114 cam install underway

    Installing my cam,springs rods, seals, oil pump, electric fans and upgrading my "big three". I selected comp cams 212/ 218 lsa 114 hi lift camshaft (rec. by 4 separate companies), hardened push rods,...
  2. Replies
    7
    Views
    4,114

    So after tons of research and taling to four...

    So after tons of research and taling to four seperate companies I ended up buying comp cams 212/218 .558/.563 lsa 114. All four places recommended this cam over their custom cams or any other...
  3. Replies
    7
    Views
    4,114

    Thunder racing said that they recommend using the...

    Thunder racing said that they recommend using the stock studs and rockers.
  4. Replies
    7
    Views
    4,114

    both said i would need to upgrade springs and...

    both said i would need to upgrade springs and push rods due to increased lift.
  5. Replies
    7
    Views
    4,114

    Cheater cam or comp cams XFI extreme truck

    I am stuck between two cams, the XFI extreme truck cam from comp cams
    dur @.5: 212/216
    Lift: .607"/.621"
    RPM Range: 800-5200
    LSA: 115
    or the thunder racing cheater v.3 camshaft
    219/230 ...
  6. 2394023941 more pics to come, this is what i...

    2394023941 more pics to come, this is what i could take with my phone
  7. Viper alarm install is super easy to do, took me...

    Viper alarm install is super easy to do, took me literally a couple hours to install my two way system. The bypass module is the best part, 3 wires and your door locks lights and door monitoring is...
  8. I will post pics as soon as I take it back apart....

    I will post pics as soon as I take it back apart. What is easy about this swap is the fact that you can use a ( volt battery to test the function of the LED since they are only able to work a...
  9. Completed LED swap for 2003 and newer silverado dash

    So today I decided to use something I learned from physics and install LED's in my gauge cluster. The overall installation was not too bad, depending on the voltage of the LED you will use and the...
  10. Replies
    5
    Views
    991

    I was debating between TR220 cam and Comp Cams...

    I was debating between TR220 cam and Comp Cams truck XFI cam used with programmer.
  11. Replies
    5
    Views
    991

    Performance camshaft

    Im bored and after installing new bushings, ball joints, new front end chassis parts, shock hoop kit< i want to do a camshaft. What camshafts work the best for lifted trucks like mine? im running...
  12. Replies
    2
    Views
    512

    Those damn soldered bulbs finally found

    If your like me and have several instrument lights out in your dash and cant find the correct bulbs to replace them, I have finally found the correct bulbs (not the radioshack ones) the OEM bulbs!!!...
  13. Replies
    9
    Views
    1,599

    Between 10 and fifteen.. If i can fit it all in a...

    Between 10 and fifteen.. If i can fit it all in a flat rate box. I have 4" lift blocks with hardware too.. FYI
  14. Replies
    16
    Views
    8,421

    The kit doesn't require you to adjust the...

    The kit doesn't require you to adjust the transmission gear shift assembly, it does state you need to lengthen the 4wd transfer case shifter. However, did not have to do this. I used the technique...
  15. Replies
    8
    Views
    2,385

    I re did my pro comp lift here a couple months...

    I re did my pro comp lift here a couple months ago, from six inches to about 9.5, and I added a 2" body lift. So total lift is 11.5 in front and 12 in the back. I used keys for the front, and new...
  16. Replies
    16
    Views
    8,421

    I did a lift on my truck recently, PA said I had...

    I did a lift on my truck recently, PA said I had to extend the 4wd linkage, but i never really had to. The install took about 5 hours, it helps to have a couple buddies come over to hand you tools.
  17. Replies
    9
    Views
    1,599

    If i am able to do flat rate box, it would only...

    If i am able to do flat rate box, it would only be like 8 bucks through h USPS
  18. Replies
    9
    Views
    1,599

    they fit 99-05 silverado with square u bolts

    they fit 99-05 silverado with square u bolts
  19. Replies
    9
    Views
    1,599

    they fir 99-05 siverado with square u bolts.

    they fir 99-05 siverado with square u bolts.
  20. Replies
    7
    Views
    1,485

    I have a new remote and Did the programming...

    I have a new remote and Did the programming sequence which still didn't work. I got a new PDM and the key less door locks still will not work. but they all work with the buttons on the doors.
  21. Replies
    7
    Views
    1,485

    Ok so today I took my passenger door panel off an...

    Ok so today I took my passenger door panel off an un plugged my PDM. I put it back together and the alarm went off (good sign) i reprogrammed the remote and all worked fine. I was in class for about...
  22. Replies
    7
    Views
    1,485

    Keyless entry just stopped

    My keyless entry just stopped one day. I reprogrammed the remotes and it worked agian for about a day and now It won't work again!!! I tried to reset the system by disconnecting the battery but that...
  23. Replies
    8
    Views
    15,687

    best muffler for 6.0L

    Curious to what muffler or exhaust set up people are running on the 6.0l silverado. Iheard dual 3" in and out sounds great. any suggestions?
  24. Replies
    38
    Views
    3,523

    MTX 10" 7500 series required an extra 3/4 spacer...

    MTX 10" 7500 series required an extra 3/4 spacer but pounds like no other. running 1500 watts to it.
  25. Replies
    4
    Views
    3,370

    That is odd.. The leveling kit would be the best...

    That is odd.. The leveling kit would be the best way to go I assume, unless new torsion bars are needed.
Results 1 to 25 of 49
Page 1 of 2 1 2