Search:

5w30 is correct, also what I use in my 2010 5.3.

What has happened several times in very cold weather (with a V8 but not a Chevy) is that I've needed to start and just barely move the vehicle so...

What weight oil did you use in your last oil change?

I have GM 20s as he said he has and mine is smooth as silk. He has something going on there besides the wheels "unless one is bent or otherwise damaged". I suspect he has a bad spindle bearing in the...

Take off the DRUM and lube the backing plate lightly where the SHOE moves against it.

Great Cummins MPG Guide- I had not seen this before. Lots of good info applicable to any vehicle.

Yeah, I've covered all these bases mentioned here. The vibration is acceptable at this point but what a headache for the guys in the shop that spent all this time getting to this point. I mean,...

My truck is sensitive as hell to the slightest tire imbalance or runout, and I've just gone through a dozen to find 4 with acceptable RFV runout and it still has vibration nibbles here and there. ...

Submitted PM...

Thanks. Just didn't know if the eccentrics were already installed at the factory. Another car I own has complete adjustability but the OEM eccentrics have to be installed first.

Manuals, manuals, manuals. I do enjoy reading technical manuals, and I can't tell you how many I have stacked up for all of the cars, motorcycles, tractors, boats, outboard motors, props, leaf...

You know, that's not a bad idea. As I become an older fart I can usually get away with something like that.

Be that as it may, I'm not going to spend a couple hundred dollars on an FSM just to see if it's got this specification listed.

If I had an FSM....

So your brother has told you by now that the car wash didn't leave the swirl marks, and he's right. A car wash won't leave swirl marks. Washing, polishing or waxing in a circular motion leaves...

If you bought this truck new or are leasing it I would advise you to read the Lemon Law information you received when you bought the truck and determine if you believe you are eligible to file for...

Pulled the driver's window switches out and disassembled and cleaned the contacts to resolve an intermittent operation condition with the rear and r/f windows. Pulled the headlight and dimmer switch...

Are you making sure you get the bulbs spotless and do not handle them with your fingers at all after that?

Title sums it up. Looking for GM driveshaft runout limits for a 1-pc driveshaft, 2010 Silverado 1500; 5.3 FFV; 3.08 rear. I have checked AllData with no luck. Thanks in advance.

Man I am picturing you tumbling out of the truck, and have to suspect you were laughing your ass off after you landed on the ground. Thanks for sharing!

I'm not going to bitch and moan too much because I know what I'm getting into before I make the purchase. But I sure like getting 19-20 in my 2010 5.3 Silverado more than the 16-17 I got with my...

Nice rig! Even at 12mpg you can buy a lot of gas with what you saved on the deal. I like it.

Very nice. I wouldn't call it an old lady's truck.

Thanks, but my question is whether or not caster and camber are adjustable on this factory stock truck.

I don't have any uneven tire wear. The steering wheel is very slightly off center so I need to center it with the tie rods and reset the toe. I just don't know if caster and camber are adjustable...

What are the stock factory front suspension alignment adjustment provisions for a 2010 Silverado 1500 LT 2WD? Just toe, or is camber/caster also adjustable?