Type: Posts; User: Brad Preece
Search: Search took 0.00 seconds.
I mean, how would longevity be any less now? For what they will be replacing, I would imagine that longevity would be greatly extended.
I can see how some technicians would want to do the cam at...
04-25-2012, 11:29 AM
Alot of the newer ones with 20s come with a rack and pinion. The truck you have isn't designed for that much resistance when turning. You might not think its alot on those parts, but it will and has...
04-25-2012, 11:25 AM
I'd imagine the sprag is the culprit for the initial issues. That being said, I'd say all the forward apply clutches and stills need to be replaced, along with an upgraded sun shell and all the other...
Dave, I'd check the fuse terminals for signs of corrosion. Unfortunately, under the two piece fuse box under the hood is where there are alot of corrosion issues.
Also, pin fitment issues inside...
Take the blower motor cage out and inspect for debris and or clogs in the cage that would impede air flow.
it sounds as if your issue is there or if it isn't, it's a mode door issue.
04-25-2012, 10:40 AM
Lsa on the cam is the direct contributing factor to idle charachteristics. I'd look into a 112 lsa or something close for a good thump, all the while maintaining drivability.
04-25-2012, 09:40 AM
My dad painted cars when I was a kid for extra money for us to vacation on and just to have spare money in general.
I can still remember the smell of filler and helping dad apply it on those old...
My name is brad Preece. I've spent over a decade involved in professionally repairing vehicles in a gm dealership.
i am now self employed in a different field, but still wrench on my own stuff.
If ou know someone with any airbrush skills and some good paint, it can be done in your garage. Of course, with adaquete...
Results 1 to 10 of 16