Type: Posts; User: nutlug
Search: Search took 0.00 seconds.
12-18-2012, 01:08 PM
If any one cares, It ended up being the cap and rotor, the spark was good going in the cap but dead coming out. New cap and rotor, Runs great !
11-24-2012, 03:47 PM
I have a 97' Tahoe 5.7L , Most of the time it starts real easy, But sometime it acts like the distributor is a tooth off, popping/ backfiring, real rough! Any ideas? Thanks, Steve
The dome switch did not work, but I found out that if you tap the emergency brake they go out.
Thanks Tim, Thats just what I wanted to hear, I'll stop worrying about that.
I picked up a 97' Tahoe, and if you walk behind it when it's running it sounds like the fuel pump is running wild, very loud, high pitched sound, like it's sucking air, even with a full tank. It runs...
07-04-2012, 03:07 PM
I picked up a 97' Tahoe, and where the tranny line goes into the Plastic tank on the radiator , It's kind of a strange looking connection, but it seems to be leaking coolant, no tranny fluied.There...
07-04-2012, 01:48 AM
I have a 95' K-2500 w/ chrome grill and 4 small headlights. I just pick up a 97' Tahoe w/ 2 big gooffy headlights and ugly gray grill. It looks like a swap would be fairly staight forward. Thoughts...
I just picked up a 97' Tahoe and the headlights are on most of the time , even with the switch is off. It looks the same as my 95' K2500 , but I'm trying to figure out if there is a problem in...
Ok, So I pulled the switch and that was it. If you look real close at the terminals the plastic is a little melted next them, $39 bucks to the dealer and it's good to go . Thanks, Steve
Ok , So I pull the resister (what a pain) looked ok but I went and got a new one and still no action from blower. Do the speed control switchs ever fail ? Any thoughts? Thanks, Steve
I just picked up a 97' Tahoe and no action out of blower so I tested the two wires. Nothing from the hightest setting, but the lower settings all read 12v about ,so I pulled the motor ,tested it runs...
I have a 95' K2500 5spd that I just had the tranny rebuilt at a tranny shop , they put 90w gear oil not Syntorq ( like the sticker says). Plus it's hard to shift. It needs the Syntorq , Right ?
I've got a 95' K2500 5 speed 7.4 L. Today lots of growls and whines stuck in 2nd gear, I'm wondering is there any differance from mine and a 5sp on a small block , or even a K1500 ? Thanks.
Results 1 to 13 of 13