GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER

Search:

Type: Posts; User: LoneWolf'burban

Page 1 of 5 1 2 3 4

Search: Search took 0.00 seconds.

  1. Replies
    31
    Views
    14,844

    Mudpuppy and Moogvo are right. I've used basic...

    Mudpuppy and Moogvo are right. I've used basic Pennzoil 5or10 30W in all of my engines. No problems. Until an oil pressure line gets sheared off at the fire wall and you have no oil. Its all...
  2. Intake gaskets are easy. Just be easy on it if...

    Intake gaskets are easy. Just be easy on it if it's a two piece manifold. 10 INCH pounds to hold down the upper piece.
  3. Josh, what's the specs on the truck you did this...

    Josh, what's the specs on the truck you did this to?
  4. Replies
    6
    Views
    827

    Check the connection at the starter. I had an 82...

    Check the connection at the starter. I had an 82 Chevy with a 305 with full length Headman headers, glasspacks bolted to them, then 12'' angle cut exahust tips bolted to those. In short, very very...
  5. Replies
    1
    Views
    405

    Yea, that's a no go on rerouting the fuel line. ...

    Yea, that's a no go on rerouting the fuel line. There's no room for it. Think I'm just gonna wrap it in aluminum foil. Next week when I get home from work.
  6. Replies
    19
    Views
    2,536

    O'Reilly's all the way for parts to keep the...

    O'Reilly's all the way for parts to keep the truck going. Or make it faster. For making it pretty AutoZone.
  7. Wow. So when are they going to hook a sensor up...

    Wow. So when are they going to hook a sensor up to our throats and charge us taxes on each breath we take and charge out the wazoo for those of us who smoke?
  8. Replies
    1
    Views
    405

    One messed up motor

    Ok, my 92 GMC Sonoma GT with a 4.3L W code engine, intake on the front of the manifold instead of the top, CFIM, one central injector and six poppet valves. It is running rich, dies when the weather...
  9. Lmao. So true about OBDI.

    Lmao. So true about OBDI.
  10. GOT IT GOING NOW!!!!!!!!!!!! But I had to have...

    GOT IT GOING NOW!!!!!!!!!!!! But I had to have it towed to the mechanic. $230 to find out I had the #6 and #1 plug wires crossed, or so I was told, and I was trying to time off the #6 wire. But...
  11. Replies
    20
    Views
    9,269

    The wire is in different places on different...

    The wire is in different places on different trucks. It's tan with a black stripe and it breaks out of the wire harness for about 6" on mine with a quick disconnect in the middle. Pop apart and set...
  12. Figured it out. There are two connectors in the...

    Figured it out. There are two connectors in the harnes between the MSD box, coil and dist that are identical. Swapped them out and I started a fire on the ground under the truck from it spitting...
  13. Replies
    20
    Views
    9,269

    My bad. I was really tired when I posted that. ...

    My bad. I was really tired when I posted that. On my truck a code 42 pops up when I disconnect the tan and black wire under the dash on the pass side right where the carpet ends. It's the one that...
  14. I was very careful on routing the harness. ...

    I was very careful on routing the harness. Didn't pinch it either. I routed it further from heat sources like the header pipes. Yes, Edlebrok full tube headers. I'm thinking oil pressure switch. ...
  15. Replies
    2
    Views
    1,236

    Why I am now boycotting Fel Pro

    I recently had the white cloud of death in my truck. Tore it down and found oil leaking up loose bolt threads and a bolt head into my intake manifold. I ordered the full over haul gasket kit for my...
  16. New intake gaskets and now no fire from coil

    My 92 GMC Sonoma GT W Code 4.3L had the white cloud of death. Blown head gasket/cracked head. (Tore into it. Point to remember is I have the two piece intake manifold with the throttle body on the...
  17. Replies
    20
    Views
    9,269

    I'm having the same problem with my 92 GMC W code...

    I'm having the same problem with my 92 GMC W code 4.3L. One day being tired of it intermittently and then permenetly retarding the timing I crawled under the hood and found a wire hanging on the...
  18. Replies
    7
    Views
    557

    I just can't wait to pull that motor and find out...

    I just can't wait to pull that motor and find out what all has been done to it. Seems like somebody wanted to pull a lot of power out of that motor. MSD box, high power ignition system as well,...
  19. Replies
    7
    Views
    557

    I tried it again. Spent all day working on...

    I tried it again. Spent all day working on getting my truck looking good. Inside and out. I was on my way home from the car wash and my truck broke down. Spent two days on the side of the road...
  20. Replies
    7
    Views
    557

    Why am I even trying? (Rain!)

    I washed my truck. It rained and I live on gravel roads. Got muddy. Wash again and vacum. Rains again, MODOT redoes the chip and seal roads I drive on to go anywhere after leaving gravel, and I...
  21. Go look at the axle under your burban. If you...

    Go look at the axle under your burban. If you have a 3/4 ton burban you could already be part way there. Mine has the dually brake drums already. I don't know if the lug studs are long enough or...
  22. Replies
    11
    Views
    1,126

    I think it's all in the pump itself. I've seen...

    I think it's all in the pump itself. I've seen it in Missouri. Usually when the pump is fast or gas takes a real big dip in price.
  23. Replies
    15
    Views
    2,462

    :gasp:They sell it by the gallon?! Right on!

    :gasp:They sell it by the gallon?! Right on!
  24. Replies
    6
    Views
    800

    An oil that provides a thicker buffer between...

    An oil that provides a thicker buffer between metal on metal contact is better for a high milage engine because it doesn't run off as fast, it doesn't leak past aging gaskets and seals like a thinner...
  25. Replies
    5
    Views
    1,308

    Leaking fire? I take it you mist the coil. ...

    Leaking fire? I take it you mist the coil. Would this work on a W code 4.3? And where is the coil on your motor? Mine is on the pass side bolted to the intake manifold above the valve cover by...
Results 1 to 25 of 112
Page 1 of 5 1 2 3 4