Type: Posts; User: Fusefinder
Search: Search took 0.02 seconds.
09-27-2011, 12:12 PM
One of the areas I was looking at the lower control arm bushings...any ideas for a temporary fix to alleviate the noise to help isolate the problem?
09-27-2011, 11:21 AM
I replaced all my ball joints, and tie rod ends this spring. I am now getting a rubber on rubber sounding squeak. I hit all the fittings with grease again (upper, lower ball joints, tie rod ends,...
I changed upper and lower ball joints, both sides this weekend, not as bad as I thought for first time. 4 hours passenger side (top had bolts) 2 hrs drivers side (top was still rivets). Not sure of...
I recently bought a 1998 S10 2wd Ext cab 2.2l.
I have noticed after driving it a while a knock or a thump in the front driver side. Not a constant, only occasional. It happens sometimes while...
Does anyone know what is the best way if any, to remove or clean the white nasty corrosion from where wheel weights were put on the stock Aluminum wheels?
Thanks for the reply.
I am looking for part 1 of the 94-03 ext cab side window. This has a piece of trim that seals the door from the wind.
What will be the best holding and least messy way to remount the rear view mirror?
First off I have a new to me, 1998 S10 LT Ext cab 2dr 2wd.
Is there a way to seal the doors without replacing the window vents that have the OEM seal for the door? The previous owner cut off the...
Results 1 to 8 of 8