Search:

Its been lifted with a rancho kit in the rear with blocks. The front on the other hand has none. But im wondering if there bigger springs/lift springs. Im clearing 35 inch mts with ease id like to...

just a thought you could do a shirt that has the sites lettering except its in the old school chevrolet writing. something that brings old school and new school together maybe. just a thought guys.
...

good to see your havin fun. im here in indiana too this december weve already seen more snow than last year altogether. now imma have to snap a few pics of the 82 in the snow.

well we just got what was said to be a blizzard here in indiana and got to use my 4x4 in my new (old) 82 k10 specs are 350/sm465 tranny/np205/dana 44 front axle. everything suspension wise has been...

Well its a stock 350 tbi. Its a 94 z71. Has 4l60e. Engine is 231k now still runs like it was new starts at the bump of a key. Holds a good 45 psi of oil pressure. I run a 170 deg. Thermostat. Aswell....

i just recently bought a remington 870 express tactical shotgun. . i use OO buck. reason for OO buckshot is if in the middle of night someone breaks in you have seconds to grab your gun. verify its...

did you ever get it figured out.

i have not tried a spacer nor bought one. but i saw a video that a guy had a 90 or 91 k5 blazer. that he had installed the tbi spacer on and reported that he did feel a pickup in power. though he did...

personally i do not like the way they look. never been a fan though my local tillmans truck parts have tons of visors usually on sale. i personally prefer the stick on tint shades. work good without...

i have read of people using plates to block them off. so basically it just makes a code then? ive had the egr malfunction code on since i unplugged vac line and capped it off. i just was making sure...

i plugged a bad egr because it was causing my stalling. i plugged it and the ol 350 tbi runs like a dream. But being theres a code lit for a egr code. what can this code cause. mpg change,timing...

well i said the same thing when it happened. i learnt the hard way. i put new Hubs on and new cv axles. i had to drive it on a jack down the street. thank god the family wasnt in with me and we got...

I too had a Jeep 98 Grand Cherokee Laredo I6 auto. motor was a beast. rest was crap. on these trucks dont look at the obvious. take a jack n stands with you and jack it up wiggle the tires see if it...

so i got all my stuff on long story short DO NOT TAKE THE CV,s OFF YOUR 4x4. i took mine off and decided to drive without cv axles too see if my vibration went away. well my truck broke both bearings...

im not certain on your 97 my 94 k1500 4x4 has hub assemblys so they just bolt on. Does it do it at every stop, come and go. or does it do it when you dont use the brakes and just roll to a stop. its...

sounds like my old mustang. had a bad booster leak. only stopped when up in the rpm range.

so i put new pitman arm on and a new set of tie rods with an adjuster on today and had 800 bucks in tires on put on yesterday. my vibration in the front left is still there not bad just after you get...

So ive put a lot of mu la in my truck lately. i redid most of the front end myself most everything was worn. ive done tie rods, shocks, upper ball joints, upper control arm bushings on driver side,...

I had a problem similar. mine was in an s10 i had front signals and one back the one on the back passenger would not work. replaced the bulb and got nothing. i took it out and got a connection after...

yah mine wasnt uncontrollable. it just had no give for any bump at all. i backed mine down equal turns on both sided im a bit more than 3/16 of an inch but my ride is stiffer than stock but you cant...

So yesterday i decided to crank my keys. my truck already is tall but like any guy its never enough. i cranked em really far. these are stock ones like i said. and like i expected it was really...

he was probly mad he just had to drop 400 bucks in it to keep it running lol.

so its been about a month and forgot about the site. sad face. well ive been real busy and pleased to say the trucks coming along great. finally fixed the 4x4 actuator(swapped it on a knocking...

LOL hahah turns a corner.....uuuuuaaaaaaahahahhhhhhhhhhhhhnnnnnnnnnnnnn. lol

is it leaking around the metal or through the rubber. if its throgh the rubber i wonder if they make a (something like a harmonic balancer sleeve that does the same thing. i use permatex the right...