Type: Posts; User: Crazycoyote82
Search: Search took 0.00 seconds.
Anybody else? I have changed the coil, cap and rotor. Still have the miss. When its in park and idling it has a slight miss. When you rev it to say 2500rpm in park theres NO miss at all. When its in...
I have a 1995 suburban with a 350 TBI. 4X4. I have this problem now and it seems to do it at idle and at speed. When idling, it seems to stumble just a lil. The rpms might drop one or two hundred....
05-18-2011, 12:28 AM
Ill take another one tomorrow. Ill try to get some better pics. Bare with me as im usin a camera phone.
05-17-2011, 09:19 PM
Im not sure if its a bracket for the lines. Theres another brace just like this one on the other side of the motor/tranny.
05-17-2011, 05:59 PM
Ill do a bit better and just post some pics... First one shows how close it is. 2nd pic shows where it missing the bolt.
05-17-2011, 05:19 PM
kind of like the fuel filter then?
05-17-2011, 04:11 PM
Sounds good except im not sure what your referring to is regards to a back up wrench?
---------- Post added at 12:11 PM ---------- Previous post was at 12:09 PM ----------
Forgot to mention....
05-17-2011, 02:33 PM
While looking into my my suburban is leaking oil, (which appears to be the oil cooler lines) I noticed that the brace on the driver side doesnt have a bolt in it on one side. Therefore it move when...
12-03-2010, 11:53 PM
For those who are curious, I changed the Ignition switch and it seems to have fixed it. 2 days now and not a single problem now.
11-28-2010, 12:16 PM
11-27-2010, 09:06 PM
Some have read my transmission problems and tach issues in my other post. After searching on here a solution could be a bad ignition switch. From what I have read you hook your meter to a ground and...
11-21-2010, 07:46 PM
Ok then, well today we were going to a birthday party and logically didnt buy a gift till on the way. It drove fine on the way to the store. I shut it off and went inside. When I came back out and...
11-20-2010, 07:08 PM
little update now, I went out and checked the fuses and they were all good. I disconnected the battery and went through and checked to make sure EVERY connection that I could find was tight. checked...
11-20-2010, 06:09 PM
So from the looks of it my problem lies somewhere in the 81 82 83 codes..... Any ideas?
What is a TCC PWM as located on code 83?
11-20-2010, 05:26 PM
I read around the net and found out that i can pull some codes with the paper clip trick. I did this and got the following.
This is just a guess but if I read your codes right your running lean and having knock/ ping. It sayd your O2 sensor is messed up. That can change your fuel mixture causing a lean condition. Which in...
11-20-2010, 04:52 PM
Would this require a OBDI or OBDII Scanner? Closest parts store is 15-20 miles away. Id rather not drive it. So i may be buying one....
11-20-2010, 04:14 PM
This all the sudden started today. While driving, it wont shift on its own. From 1-2, 2-3. 3-2, 2-1. Theres no OD at all. It just flat out wont shift into it. If you come to a complete stop while you...
08-19-2010, 11:48 PM
i wish but sadly no.
07-21-2010, 11:40 AM
I think my next step is going to be a volt meter. Anyplace online that has a list of sorts for various parts and what there reading should be?
07-21-2010, 11:36 AM
07-21-2010, 02:14 AM
I havent bought one yet based on the price of the switch. ($50-$100 used to new). With 4 kids its tough to replace parts hoping thats what fixes it ya know?
07-21-2010, 01:47 AM
Anybody have any ideas??
07-19-2010, 12:48 AM
I have a 1995 suburban. We bought it used from a Dr who took great care of it. As well as provided paperwork for everything. However, ever since we got it the Driver side window has worked on and...
Im in between Queen Creek/ Santan valley and Florence, AZ
Results 1 to 25 of 26