Type: Posts; User: Dtjb
Search: Search took 0.00 seconds.
The milky oil is concentrated under something that looks like a PCV valve. Still not good as it comes from the drivers side valve cover.
I'm discouraged by the mess I found in there. I'm trying to attach some pics. I hope it works. There is no vacume line attached to the regulator and I'm not sure where one would come from if there...
01-17-2013, 11:30 AM
do I need new gasket kits before I get started
01-17-2013, 10:44 AM
Does the whole manifold really have to come off??
02-25-2012, 08:26 PM
OK. Here's the outcome. I did have a bad water pump. I took the radiator out and the replacement drain plug was also bad. It was slightly smaller than the original and would not stay seated. I...
01-30-2012, 08:54 PM
I finally discovered the waterpump weeping Sun morning when I took the radiator cap off (I guess it created a vacuum ). I changed the pump and took a quick test drive. All seemed well till this...
01-28-2012, 10:54 AM
Thanks for the replies and I apologize for taking so long to reply. I have more info for the mechanical minds here. There is no leak evident. However, with the engine running I took off the...
01-26-2012, 06:43 PM
Thanks for the reply. The radiator cap was my first move. I replaced the drain plug with one from my local Chevy dealer and took a test drive. Everything seemed fine but one more drive to work...
01-26-2012, 10:33 AM
I'm loosing coolant. The thermostat is working. The water pump is not leaking and the engine stays cool (when it has coolant) but after a good drive 15 mi. or so the radiator is steamy and coolant...
I'm a 20+ year shade tree mechanic and I've always appreciated the relative simplicity of a GMC to work on compared to other vehicles. I found these forums while searching for help on a motorcycle I...
Results 1 to 10 of 10