Type: Posts; User: mace1530
Search: Search took 0.00 seconds.
11-04-2013, 01:06 PM
ok long time later, i figured it out! bad distributer, and intake air temp control sensor, caused the idle to lope. Running Great!
02-07-2012, 05:42 PM
Thanks, and you could be right, but i purchased it at Jegs, and according to the book, and saleman, this is the biggest cam I could go without modifying anything(but I am not ruling out what you...
02-06-2012, 08:53 PM
Okay folks, Merry belated Christmas, and Happy New Year.
So, I have beeen driving sparingly, and have put about 200 miles on the motor, with the esc unplugged. As of yesterday(and I started a new...
12-16-2011, 02:51 PM
Road tested today actually, seems to run fine with the esc disconnected. still havent replaced the distributer as you suggested, that will be an "after Christmas Project", Lol. Thanks for Your advice...
12-16-2011, 02:33 PM
Thanks for all the advice! i am still having the same issues, and have advanced the timing (tan wire disconnected) up to about 16 btdc. I have Not replaced the distributer yet.......like i said, runs...
12-04-2011, 11:54 AM
Thanks for your response, but I tried that, and no luck. motor still dies when i put in gear, or turn the steering wheel all the way right or left.....if I leave the esc wire disconnected, will it...
I have a 1990 Scottsdale, shortbed 4x4 I am working on. Completely redone TBI 350. Working on it since March, Lol!
12-02-2011, 08:03 PM
Thanks Ezdaar, but not sure what you mean by the cam card....sorry...
12-02-2011, 04:42 PM
Thanks for responding!
esc, electronic spark control(tan wire with black stripe located on the firewall).Did not replace cap and rotor, fuel filter, or distributer, but new plugs and wires. It seems...
12-02-2011, 11:24 AM
I am new to this club, and look forward to any help You all can provide, Thanks in advance!
I have a 1990 (chevy of course) 4x4 stepside, 5.7 TBI, that I am restoring. When I bought...
Results 1 to 10 of 10